Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/72250
Title: Planar and non-gold metal stacks processes and conduction mechanisms for AlGaN/GaN high-electron-mobility transistors on silicon
Authors: Li, Yang
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2017
Source: Li, Y. (2017). Planar and non-gold metal stacks processes and conduction mechanisms for AlGaN/GaN high-electron-mobility transistors on silicon. Doctoral thesis, Nanyang Technological University, Singapore.
Abstract: AlGaN/GaN high-electron-mobility transistors (HEMTs) have demonstrated great potentials in high voltage and high frequency applications due to the advantage in their intrinsic material properties such as wide band gap, high electron saturation velocity, high sheet carrier density, etc. Conventionally, AlGaN/GaN HEMTs are realized in III-V fabrication line using the processes such as mesa isolation, gold-based ohmic contacts and gate electrodes etc. that are not used in Si CMOS line With the advances of epitaxial growth technology, the crack-free AlGaN/GaN heterostructure can be realized in large diameter (200 mm) Si substrate with low wafer bowing values, which provides the possibility of fabricating devices on larger size and lower cost substrates in contrast to silicon carbide substrates. In recent years, CMOS-compatible processes have received considerable attentions. This approach allows high-volume low-cost fabrication of AlGaN/GaN HEMTs by utilizing the existing Si foundries. Also, the CMOS-compatible processes offer the opportunity of on-chip integration of GaN devices with Si integrated circuits (ICs). In this thesis, the focus is to develop the key process modules which will be CMOS compatible for AlGaN/GaN HEMTs. The three process modules include planar isolation by ion-implantation, non-gold ohmic contact, and non-gold Schottky gate. In addition, the conduction mechanisms and its physical origin are also systematically analyzed to understand the impact of developed processes to the characteristics of AlGaN/GaN HEMTs on Si substrate. The planar isolation is achieved in AlGaN/GaN HEMTs using multi-energy ultra-heavy 131Xe+ ion-implantation. About an order of magnitude lower buffer leakage current, and an order of magnitude higher buffer sheet resistance and ON/OFF current ratio are observed in the implant-isolated HEMTs when compared to the conventional mesa-isolated HEMTs. The Arrhenius plot reveals an activation energy (0.513 eV) that belongs to the lattice damage caused by heavy ions, which is the origin of the high resistivity in the implanted region. The implant-isolated AlGaN/GaN HEMTs exhibit comparable DC output and transfer characteristics to the mesa-isolated HEMTs. Due to the elimination of leakage paths at the mesa side wall, the buffer breakdown voltage is almost unchanged with and without Si3N4 passivation. The OFF-state breakdown voltage is also improved and the gate leakage current is reduced. The non-gold ohmic contacts are realized by Ta/Si/Ti/Al/Ni/Ta metal stacks with a low contact resistance (~ 0.22 Ω·mm) and a smooth surface morphology. The low contact resistance is attributed to the formation of low work function Titanium Silicides (TiSix) at the metal-semiconductor (M-S) interface. As the AlGaN/GaN epi-layers are protected by the bottom-Ta refractory layer, the metal stacks do not react with (Al)GaN. Hence, the conduction mechanism of AlGaN/GaN HEMTs with our non-gold metal stacks is confirmed to be thermionic emission (TE) through a low energy barrier (~ 0.113 eV) at the M-S interface, which is different from the thermionic-field emission (TFE) observed in conventional gold-based ohmic contacts. The non-gold Schottky gate is realized by sputtered TiN with an improved Schottky barrier height (SBH ~ 1.1 eV) as compared to other reported TiN-based gates. The improvement of SBH may be due to the incorporation of oxygen, the surface crystal orientation, or the relatively high N2 ratio in the total gas flow. The study on gate leakage current reveals that the conduction mechanism is dominated by Poole-Frenkel emission at low reverse bias (-3.2 V < VR < 0) through an interface state of 0.53 eV, and by trap-assisted tunneling at high reverse bias (-20 V < VR < -3.2 V) through another interface state of ~ 0.115 eV. The AlGaN/GaN HEMTs with sputtered TiN gate demonstrate comparable DC output and transfer characteristics and dynamic/static ON-resistance ratio, improved OFF-state breakdown voltage, and reduced gate leakage current as compare to the device with conventional Ni/Au gate. In summary, three important and challenging process modules in developing CMOS-compatible processes for the fabrication of AlGaN/GaN HEMTs on Silicon substrate have been systematically studied and reported in this thesis. The multi-energy ultra-heavy 131Xe+ implantation, ohmic contacts with non-gold metal stacks (Ta/Si/Ti/Al/Ni/Ta), and non-gold Schottky gate (sputtered TiN) are demonstrated with improved device performance. The conduction mechanisms of both ohmic and Schottky contacts are also systematically studied. The findings in this thesis provide valuable solutions for the development of CMOS-compatible processes, which can be potentially used for the high-volume and low-cost fabrication of AlGaN/GaN HEMTs in Si foundries for commercial applications.  
URI: http://hdl.handle.net/10356/72250
DOI: 10.32657/10356/72250
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:EEE Theses

Files in This Item:
File Description SizeFormat 
PhD Thesis LI YANG G1101268H_revision_Final.pdfPh.D Degree Thesis_Li Yang_G1101268H7.39 MBAdobe PDFThumbnail
View/Open

Page view(s) 50

276
Updated on May 16, 2021

Download(s) 20

234
Updated on May 16, 2021

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.