Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/72918
Title: Rock bolt modelling in rock cavern
Authors: Aziz, Noorul
Keywords: DRNTU::Engineering::Civil engineering
Issue Date: 2017
Abstract: Excavation in rock mass is a 3D process and the ensuing deformation cannot be directly simulated in a 2D finite element plane strain analysis. Hence, when this process is analysed in a 2D finite element plane strain analysis, different assumptions and approaches can be adopted. Some of the approaches include the convergence-confinement method and the stiffness reduction method. The stiffness reduction method is the approach used in Dimensional Discontinuous Deformation Analysis (DDA-2D) numerical software to simulate 3D excavation in a 2D scenario in this project. The method works by multiplying a reduction factor to the elasticity modulus of the material to be excavated to simulate tunnel advancement. By gradual reduction of the elasticity modulus of the material to be excavated in each model, a number of models with different tunnel advancement scenarios can be created. In this project, three models representing different tunnel advancement scenarios with same geological condition would be used to study the displacement and stresses in the blocks and the forces in the rock bolts. Hence, the influence of rock bolt on the rock cavern under various installation times can be determined
URI: http://hdl.handle.net/10356/72918
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:CEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP Report (Noorul Aziz).pdf
  Restricted Access
FYP Report12.86 MBAdobe PDFView/Open

Page view(s) 50

79
checked on Oct 24, 2020

Download(s) 50

10
checked on Oct 24, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.