Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/74710
Title: Electromagnetic shielding measurement of equipment casing
Authors: Yap, Venus Yu Ying
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radio
Issue Date: 2018
Abstract: Electromagnetic Compatibility (EMC) is of increasing importance as the number of wireless devices increases. However, it is becoming more difficult to meet EMC standards for electronic products that are smaller in size and have faster switching speeds without a well-designed shielding enclosure. Electronics design engineer have to take into account the ventilation design requirement while maintaining the shielding effectiveness (SE) of the enclosure. The metallic enclosure acts as a shield to limit Electromagnetic Interference (EMI) by attenuating radiated emissions from the radiation source housed in the enclosure. Hence, it is important to estimate the SE of the enclosure before fabrication to ensure optimum shielding. The SE of a metallic enclosure for a typical electronic product with various ventilation designs will be studied in this project. An EMC test chamber, Gigahertz Transverse Electromagnetic (GTEM) Cell, will be used to conduct radiated EMC test to study the SE of an enclosure with different aperture designs while containing a high frequency noise source. Computer Simulation Technology (CST) Microwave Studio is an electromagnetic simulation software used to verify the results obtained from the GTEM Cell.
URI: http://hdl.handle.net/10356/74710
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Venus Yap Yu Ying_U1421966E_Final Report.pdf
  Restricted Access
FYP Report2.14 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.