Please use this identifier to cite or link to this item:
Title: Design and test a power management board for a satellite radar system on chip
Authors: Yeo, Eugene Sheng Guan
Keywords: DRNTU::Engineering
Issue Date: 2018
Abstract: This project is about the designing and testing of a power management Printed Circuit Board (PCB) that is used for power supply in a transmitter in a satellite. The specifications of the power board are that it should be able to output 1.2V with a current of at least 800mA. A free software, Eagle by Autodesk will be used for this project to design. The design of the power management board after research has been decided that a LT3080 chip will be the core of this power board. After the design of the PCB is completed on this software, it will be sent for fabrications by an external company. When the fabrication is done, the components will be soldered and testing will begin. There will be two phases of the testing. The PCB will be tested individually first, followed by an integrated testing with a test system that is pre-built. The results were that a PCB board that could supply a voltage of 1.2V and a current of at least 800mA to the simulated load was built.
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP Report.pdf
  Restricted Access
3.05 MBAdobe PDFView/Open

Page view(s) 50

Updated on Dec 2, 2020


Updated on Dec 2, 2020

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.