Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/75707
Title: Effect of heat treatment on cold sprayed Ti-6Al-4V alloy
Authors: Mao, Mengyuan
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2018
Abstract: In this dissertation, cold sprayed Ti-6Al-4V coatings were annealed at six different conditions to investigate the heat treatment effect. With the temperature increasing from 300 to 950 °C, the atomic diffusion between the particles continuously eliminated the pores in the coatings. And ultrafine grain could be found in the microstructure of coating heated at 950 oc. While both top surface and cross section of the coating could obtain the highest and lowest hardness at 400 oc and 9 50 °C, respectively. By simulating the particle deposition process in the ABAQUS finite element software, the stress and temperature profiles were evaluated. The single impact results showed that higher impact velocity led to higher stress and temperature, especially at the interface. Before the particle finally deposited on the substrate, the stress reduced by nearly 10% due to localized heat. And the second impact revealed that the interface of coating layer and substrate experienced much higher stress than other area, which could lead to cracks of the coating. In conclusion, heat treatment has significant influence on the microstructure and mechanical properties of cold sprayed Ti-6Al-4V coatings, and might has certain effect on the residual stress based on the simulation results.
URI: http://hdl.handle.net/10356/75707
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Theses

Files in This Item:
File Description SizeFormat 
MaoMengyuan_2018.pdf
  Restricted Access
13.6 MBAdobe PDFView/Open

Page view(s) 20

385
checked on Sep 25, 2020

Download(s) 20

20
checked on Sep 25, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.