Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/75723
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSaravanan Ponmani-
dc.date.accessioned2018-06-11T07:39:09Z-
dc.date.available2018-06-11T07:39:09Z-
dc.date.issued2018-
dc.identifier.urihttp://hdl.handle.net/10356/75723-
dc.description.abstractThe aim of this project was to see the effectiveness and reliability of 3D printed resistors. Currently, there are no reliable 3D printed resistors in the industry. The resistors were printed using an Aerosol Jet Printer. The resistors were printed on a flexible substrate. These resistors were then sintered in a thermal oven at various temperatures to give it electrical properties. Then they were tested with a multi-meter and a Field Emission Scanning Electron Microscope (FESEM) to compare with industry standards. By printing reliable resistors, we can directly print the resistors onto a circuit board without the need for surface mounting. This will cut down on the fabrication and assembly time.en_US
dc.format.extent44 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University-
dc.subjectDRNTU::Engineering::Materials::Testing of materialsen_US
dc.title3D printing of resistorsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorTran Anh Tuanen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
A249 Final Year Project Report.pdf
  Restricted Access
3D printing of resistors2.99 MBAdobe PDFView/Open

Page view(s)

118
Updated on Apr 9, 2021

Download(s) 50

42
Updated on Apr 9, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.