Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/75803
Title: Interconnection of objects with sensing capability
Authors: Low, Alton Jun Xiang
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2018
Abstract: The objective of this project is to build a network of devices (also known as “Things” in this context) which utilise the mesh networking topology to simulate a typical IoT local network. The XBee S2C wireless transceiver will be tested for the suitability of battery powered IoT devices. Current consumption characteristics of the system will also be measured and analysed using a microcontroller development board with built in current measuring capabilities along with different transmit power settings. Firstly, background knowledge of the choice of microcontroller and the wireless transceiver used in this project will be given. Next, the construction of and explanation of the software in the system and procedures of the current measurements are presented. Finally, the conclusion, discussion of the project and recommendations for future work are stated. From the experiment results, it is concluded that the XBee S2C wireless transceiver is not suitable for coin battery powered applications due to its high peak current draw.
URI: http://hdl.handle.net/10356/75803
Schools: School of Electrical and Electronic Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Final Report - A2258-171 - Interconnection of Objects with Sensing Capability_Rev1.pdf
  Restricted Access
4.78 MBAdobe PDFView/Open

Page view(s)

296
Updated on Jun 11, 2024

Download(s)

15
Updated on Jun 11, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.