Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/76263
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLow, Wei Bin
dc.date.accessioned2018-12-13T14:08:22Z
dc.date.available2018-12-13T14:08:22Z
dc.date.issued2018
dc.identifier.urihttp://hdl.handle.net/10356/76263
dc.description.abstractThis report presents the coverage and capacity modelling analysis for Public Safety LTE (Long Term Evolution) in Singapore with the proposed in-building communication system design. A modelling methodology was used to sketch up the building model. Thereafter, simulation results were generated to provide recommendations on the area of coverage and the number of users the proposed in-building communication system can support. The report would be covering on the literature review of LTE and electromagnetic-wave propagation such as reflection, refraction, diffraction and fading which are aspects of advanced propagation model of fast ray tracing that considers how different surfaces affect indoor propagation. Additionally, considerations used for coverage and capacity planning would be adopted to design the in-building communication system. The modelling methodology starts with conducting a site survey to obtain information of present radio signal received power within the building of interest. These results would be used for calibration of the 3D model that would be sketched up. An in-building communication system would be designed, and simulation results would be generated with the 3D model and the incorporated fast ray tracing propagation model to achieve a predicted area of coverage and capacity level; to determine if the results meet the requirements needed to be achieved as stated by the users. The results obtained would serve as a recommendation on the area of coverage and the number of users the proposed in-building communication system can support. Additionally, system optimization was done to improve resource utilization and to reduce project capital. The modelling methodology adopted in this report could be used by RF engineers for future in-building communication system design and implementationen_US
dc.format.extent62 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Wireless communication systemsen_US
dc.titleCoverage and capacity modelling analysis for public safety LTE in Singaporeen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorShao Xuguangen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineering (Electrical and Electronic Engineering)en_US
dc.contributor.organizationSingapore Technologies Electronics ( ST. Electronics )en_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
PDF of FYP.pdf
  Restricted Access
2.15 MBAdobe PDFView/Open

Page view(s)

60
Updated on Nov 28, 2020

Download(s) 5

12
Updated on Nov 28, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.