Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/77248
Title: Investigation and reduction of internal stress in nickel sulfamate electrolyte electroforming process through temperature and electrolyte composition variation
Authors: Tay, Yi Li
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2019
Abstract: Internal stress caused by electrodeposition using previously found optimum conditions were investigated and reduced. This project aims to achieve internal stress that is within the acceptable range of -8 kgf/mm2 to 0 kgf/mm2. Internal stress values induced by using optimum conditions were found to be tensile in nature and much higher than the acceptable range, at about 84.584 kgf/mm2. Rectification included the lowering of plating bath temperature from 55°C to 35°C, which dropped the internal stress value by more than half. Nickel (II) Bromide was also found to possibly be a better alternative to Nickel (II) Chloride as the source for halide ions. Overall, internal stress was reduced by about 9 times the initial amount to 9.053 kgf/mm2, but is still not within acceptable range. As this is an ongoing project, further investigations and researches will be required to prove Nickel (II) Bromide as an alternative and to reduce internal stress down to the acceptable range.
URI: http://hdl.handle.net/10356/77248
Schools: School of Mechanical and Aerospace Engineering 
Organisations: Seiko Instruments Singapore Pte. Ltd.
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
TayYiLi_FinalReport v3.pdf
  Restricted Access
FYP Final Report2.25 MBAdobe PDFView/Open

Page view(s)

226
Updated on Jun 25, 2024

Download(s)

6
Updated on Jun 25, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.