Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/77873
Title: Further study of laser surface treatment of 52100 steel
Authors: Chiu, Jing Jie
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2019
Abstract: AISI 52100 steel contains high amount of carbon and chromium. Due to its high wear resistance and good contact fatigue, it is extensively used in mechanical components such extrusion tools and to manufacture bearings. In this project, experimental studies on laser hardening of AISI 52100 alloy steel under different types of purging gases and laser parameters were a conducted and analyzed. The microstructure changes are analyzed using stereo, optical and scanning electron microscope. Hardness values were determined using the Vickers Hardness machine. After experiments were conducted, it was realized that different purging gases did not cause much variations in the hardness value. However, the different operating laser parameters had a huge impact on the hardened depth, width as well as hardness values. Both the laser scanning speed and power plays an important role in determining the heat-treated region’s depth, width and hardness value. When the laser power is low (100W) or the laser scanning speed (200mm/s) is high, the hardening effect is not significant.
URI: http://hdl.handle.net/10356/77873
Schools: School of Mechanical and Aerospace Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Chiu Jing Jie (U1622672D) FYP Final Report.pdf
  Restricted Access
FYP Final Report10.28 MBAdobe PDFView/Open

Page view(s)

141
Updated on May 24, 2024

Download(s)

7
Updated on May 24, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.