Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/77893
Title: Software receiver for GPS L5
Authors: Owyong, Marcus Tat Wei
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Satellite telecommunication
Issue Date: 2019
Abstract: There are many commercial GPS RF front end receivers around the world. Most of them are able to perform standard signal processing results. Over the years, technology has improved along the way. This had led to advance hard designs and software designs that helps to cut the cost reduction, able to support higher undefined navigation signals and much more accurate. To process a GPS signal in real time is a complex procedure that even devices nowadays are upgrading to be on par with it. The goal of this project was to test out using GPS L1 signals to have a greater understanding on how it works by demodulating decoding the signals and bringing this concept to work on GPS L5. In this project, it also allows you to experience the start of creating and designing a new GPS receiver board from the start to the end and testing it out to make sure it is working. It helps to develop a firmware that enable the program to register the MCU, enabling the receiver board to work.
URI: http://hdl.handle.net/10356/77893
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP_MARCUS_OWYONG_FINAL_REPORT.pdf
  Restricted Access
4.43 MBAdobe PDFView/Open

Page view(s) 50

30
checked on Oct 25, 2020

Download(s) 50

7
checked on Oct 25, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.