Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/78729
Title: Micromechanics study of the free surfaces with micro-patterns
Authors: Tay, Amos Jia Jie
Keywords: Engineering::Mechanical engineering
Issue Date: 2019
Abstract: A surface with micro patterns will appear to be a clear flat surface to the naked eye. However, these micro patterns will have different mechanical properties when embedded onto the apparent flat surface. In this project, a micromechanics study known as finite element method (FEM) will be applied on the micro and macro models to study specific parameters of the model. This is achieved with the use of a finite element software, ANSYS. Various boundary conditions and methods of approximation are utilised in this paper. Thereafter, through comparison of the parameters of both simulated models, the effective properties can be approximated out. It is observed that micro-patterns on the surface causes a decrease in effective stiffness of the surface and is further agreed with an increase in Poisson’s ratio. To add on, increasing of the effective patterns width will also cause a decrease in effective stiffness of the model.
URI: http://hdl.handle.net/10356/78729
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Tay Jia Jie, Amos FYP U1621245A.pdf
  Restricted Access
786.32 kBAdobe PDFView/Open

Page view(s)

23
checked on Sep 23, 2020

Download(s)

4
checked on Sep 23, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.