Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/79881
Title: Feasibility study of using porous metal as practical shielding material
Authors: Ling, Y.
Ho, S. F.
See, Kye Yak
Koh, Wee Jin
Ma, Jan
Keywords: DRNTU::Engineering::Electrical and electronic engineering
DRNTU::Engineering::Materials
Issue Date: 2008
Source: See, K. Y., Ling, Y., Koh, W. J., Ma, J., & Ho, S. F. (2008). Feasibility study of using porous metal as practical shielding material. In proceedings of the Asia-Pacific Symposium on Electromagnetic Compatibility and 19th International Zurich Symposium on Electromagnetic Compatibility: Singapore, (pp.451-454).
Conference: Asia-Pacific Symposium on Electromagnetic Compatibility and International Zurich Symposium on Electromagnetic Compatibility (19th : 2008 : Singapore)
Abstract: This paper presents the feasibility study of using porous metal for electromagnetic shielding purposes. Using the highly porous aluminum (close to 90% porosity) as the material under study, its shielding effectiveness (SE) was studied systematically. A preliminary measurement was carried out to evaluate the SE of porous aluminum sample. This was followed by a full-wave EM modeling of the porous aluminum shielded box. Finally, a shielded enclosure was assembled using porous aluminum panels and the overall SE of this enclosure was measured. With the conventional installation method, the enclosure has been found to provide at least 60 dB shielding effectiveness in the frequency range of 250 kHz to 1 GHz.
URI: https://hdl.handle.net/10356/79881
http://hdl.handle.net/10220/6385
DOI: 10.1109/APEMC.2008.4559909
Schools: School of Electrical and Electronic Engineering 
Organisations: Electromagnetic System Lab, DSO National Laboratories
Rights: © 2008 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/site This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:EEE Conference Papers

Files in This Item:
File Description SizeFormat 
Feasibility study of using porous metal as practical shielding material.pdf240.7 kBAdobe PDFThumbnail
View/Open

Page view(s) 5

980
Updated on Jun 23, 2024

Download(s) 10

475
Updated on Jun 23, 2024

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.