Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/79928
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDong, Zhilien
dc.contributor.authorWhite, Timothy Johnen
dc.contributor.authorWei, B.en
dc.date.accessioned2011-07-14T00:51:11Zen
dc.date.accessioned2019-12-06T13:37:01Z-
dc.date.available2011-07-14T00:51:11Zen
dc.date.available2019-12-06T13:37:01Z-
dc.date.copyright2001en
dc.date.issued2001en
dc.identifier.citationDong, Z. L., Wei, B., & White, T. J. (2001). Study of Calcium/Lead Apatite Structure Type for Stabilising Heavy Metals. Materials Research Society Symposium Proceedings, 658..en
dc.identifier.urihttps://hdl.handle.net/10356/79928-
dc.description.abstract(CaxPb10-x)(VO4)6F2 apatites were synthesised and their microstructures were studied using powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy before and after leach testing. X-ray diffraction showed that the apatites were hexagonal with a ≈ 10Å and c ≈ 7Å. During the leach test, Pb was released into the solution more slowly than Ca, which is desirable as the immobilisation of Pb is of importance. The experimental results also showed that V was almost undetectable in the leaching test solutions. In the (Ca7Pb3)(VO4)6F2 pellet, Ca and Pb distributions were not homogenous from one grain to another. Microstructural evidence from scanning electron microscopy revealed that the dissolution via development of etch pits began at grain boundaries and inside grains, and progressed faster in Ca rich regions. These results suggest that apatites of high Pb to Ca ratio are more durable.en
dc.format.extent6 p.en
dc.language.isoenen
dc.rights© 2000 Materials Research Society. This paper was published in Materials Research Society Symposium Proceedings and is made available as an electronic reprint (preprint) with permission of Materials Research Society. The paper can be found at the following DOI: http://dx.doi.org/ 10.1557/PROC-658-GG6.33. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.subjectDRNTU::Engineering::Materials::Ecomaterialsen
dc.titleStudy of calcium/lead apatite structure type for stabilising heavy metalsen
dc.typeConference Paperen
dc.contributor.schoolSchool of Materials Science & Engineeringen
dc.contributor.conferenceMaterials Research Society Symposium (2001)en
dc.identifier.doi10.1557/PROC-658-GG6.33en
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MSE Conference Papers
Files in This Item:
File Description SizeFormat 
80. Study of calcium lead apatite structure type for stabilising heavy metals.pdf1.09 MBAdobe PDFThumbnail
View/Open

Page view(s) 1

1,446
Updated on Dec 1, 2020

Download(s) 5

601
Updated on Dec 1, 2020

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.