Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/80577
Title: Tunable Chemical Release from Polyester Thin Film by Photocatalytic Zinc Oxide and Doped LiYF4 Upconverting Nanoparticles
Authors: Cheng, Ting
Ortiz, Raphael Francois
Vedantham, Kumar
Naccache, Rafik
Vetrone, Fiorenzo
Marks, Robert S.
Steele, Terry W. J.
Keywords: PLGA
Photocatalysis
Issue Date: 2014
Source: Cheng, T., Ortiz, R. F., Vedantham, K., Naccache, R., Vetrone, F., Marks, R. S., et al. (2015). Tunable Chemical Release from Polyester Thin Film by Photocatalytic Zinc Oxide and Doped LiYF4 Upconverting Nanoparticles. Biomacromolecules, 16(1), 364-373.
Series/Report no.: Biomacromolecules
Abstract: Once manufactured or implanted, polyester release kinetics tend to be fixed with little modulation possible for optimal local chemical concentrations. Here, a typical implantable polyester was fabricated into thin films (∼50 μm thick) with additives of photocatalytic ZnO nanoparticles, lanthanide-doped LiYF4 nanoparticle upconverting nanoparticles, or a combination thereof and irradiated with either 6 mW ultraviolet (365 nm) light emitting diodes or 50 mW near-infrared (980 nm) laser diodes to induce polymer photooxidation. Irradiated polyester films with the aforementioned photoadditives had enhanced release kinetics up to 30 times more than nonirradiated, neat films with extended release times of 28 days. Near-infrared, ZnO-mediated photocatalysis had the highest light on/light off ratio release kinetics of 15.4, while doped LiYF4 upconversion nanoparticles paired with ZnO nanoparticles had the highest linear R2 correlation of 0.98 with respect to duty cycle and release kinetics. Future applications of the technology will aim toward modulation of previously developed polymeric reagents/drugs for real-time, feedback-optimized release.
URI: https://hdl.handle.net/10356/80577
http://hdl.handle.net/10220/42169
ISSN: 1525-7797
DOI: 10.1021/bm501567m
Rights: © 2014 American Chemical Society. This is the author created version of a work that has been peer reviewed and accepted for publication by Biomacromolecules, American Chemical Society. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1021/bm501567m].
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:MSE Journal Articles

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.