Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/80836
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLam, Yee Cheongen
dc.contributor.authorJoshi, Sunil Chandrakanten
dc.contributor.authorLiu, X. L.en
dc.date.accessioned2015-11-13T06:54:54Zen
dc.date.accessioned2019-12-06T13:59:59Z-
dc.date.available2015-11-13T06:54:54Zen
dc.date.available2019-12-06T13:59:59Z-
dc.date.copyright2000en
dc.date.issued2000en
dc.identifier.citationLam, Y. C., Joshi, S. C., & Liu, X. L. (2015). Numerical simulation of the mould-filling process in resin-transfer moulding. Composites Science and Technology, 60(6), 845-855.en
dc.identifier.urihttps://hdl.handle.net/10356/80836-
dc.description.abstractThis paper presents a simulation procedure for the mould-filling processes in which a field-analysis module of a general-purpose finite-element package is employed. The formulations used in this procedure are based on the finite element/nodal control-volume approach. The numerical concepts employed for modelling the effects of convective heat transfer on temperature and resin cure are discussed. Numerical implementation of the procedure is presented. The procedure was applied to simulate different mould-filling examples under isothermal and non-isothermal conditions. The results show that the simulation procedure developed is numerically valid and stable, and provides reasonably accurate predictions.en
dc.language.isoenen
dc.relation.ispartofseriesComposites Science and Technologyen
dc.rights© 2000 Elsevier. This is the author created version of a work that has been peer reviewed and accepted for publication by Composites Science and Technology, Elsevier. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1016/S0266-3538(99)00192-X].en
dc.subjectCuringen
dc.subjectComputational simulationen
dc.subjectFinite-element analysisen
dc.subjectNodal control-volumeen
dc.subjectPolymer-matrix compositesen
dc.titleNumerical Simulation of Mould Filling Process in Resin Transfer Mouldingen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.1016/S0266-3538(99)00192-Xen
dc.description.versionAccepted versionen
dc.identifier.rims72130en
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MAE Journal Articles
Files in This Item:
File Description SizeFormat 
mfilling1d2-rev1.pdf243.56 kBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations 5

58
Updated on Mar 9, 2021

PublonsTM
Citations 5

46
Updated on Mar 7, 2021

Page view(s) 20

558
Updated on Aug 12, 2022

Download(s) 20

153
Updated on Aug 12, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.