Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/81400
Title: Biomimetic three-dimensional anisotropic geometries by uniaxial stretch of poly(ɛ-caprolactone) films for mesenchymal stem cell proliferation, alignment, and myogenic differentiation
Authors: Wang, Zu-yong
Teo, Erin Yiling
Chong, Mark Seow Khoon
Zhang, Qin-yuan
Lim, Jing
Zhang, Zhi-yong
Hong, Ming-hui
Thian, Eng San
Chan, Jerry Kok Yen
Teoh, Swee-Hin
Keywords: Chemical and Biomedical Engineering
Issue Date: 2013
Source: Wang, Z.-y., Teo, E. Y., Chong, M. S. K., Zhang, Q.-y., Lim, J., Zhang, Z.-y., et al. (2013). Biomimetic Three-Dimensional Anisotropic Geometries by Uniaxial Stretch of Poly(ɛ-Caprolactone) Films for Mesenchymal Stem Cell Proliferation, Alignment, and Myogenic Differentiation. Tissue Engineering Part C: Methods, 19(7), 538-549.
Series/Report no.: Tissue engineering part C: methods
Abstract: Anisotropic geometries are critical for eliciting cell alignment to dictate tissue microarchitectures and biological functions. Current fabrication techniques are complex and utilize toxic solvents, hampering their applications for translational research. Here, we present a novel simple, solvent-free, and reproducible method via uniaxial stretching for incorporating anisotropic topographies on bioresorbable films with ambitions to realize stem cell alignment control. Uniaxial stretching of poly(ɛ-caprolactone) (PCL) films resulted in a three-dimensional micro-ridge/groove topography (inter-ridge-distance: 6 μm; ridge-length: 90 μm; ridge-depth: 200–900 nm) with uniform distribution and controllable orientation by the direction of stretch on the whole film surface. When stretch temperature (Ts) and draw ratio (DR) were increased, the inter-ridge-distance was reduced and ridge-length increased. Through modification of hydrolysis, increased surface hydrophilicity was achieved, while maintaining the morphology of PCL ridge/grooves. Upon seeding human mesenchymal stem cells (hMSCs) on uniaxial-stretched PCL (UX-PCL) films, aligned hMSC organization was obtained. Compared to unstretched films, hMSCs on UX-PCL had larger increase in cellular alignment (>85%) and elongation, without indication of cytotoxicity or reduction in cellular proliferation. This aligned hMSC organization was homogenous and stably maintained with controlled orientation along the ridges on the whole UX-PCL surface for over 2 weeks. Moreover, the hMSCs on UX-PCL had a higher level of myogenic genes' expression than that on the unstretched films. We conclude that uniaxial stretching has potential in patterning film topography with anisotropic structures. The UX-PCL in conjunction with hMSCs could be used as “basic units” to create tissue constructs with microscale control of cellular alignment and elongation for tissue engineering applications.
URI: https://hdl.handle.net/10356/81400
http://hdl.handle.net/10220/17489
DOI: 10.1089/ten.tec.2012.0472
Rights: © 2013 Mary Ann Liebert, Inc. This paper was published in Tissue Engineering - Part C and is made available as an electronic reprint (preprint) with permission of Mary Ann Liebert, Inc. The paper can be found at the following official DOI: [http://dx.doi.org/10.1089/ten.tec.2012.0472]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:SCBE Journal Articles

SCOPUSTM   
Citations

39
Updated on Jul 21, 2020

PublonsTM
Citations

38
Updated on Jan 15, 2021

Page view(s) 20

437
Updated on Jan 21, 2021

Download(s) 10

298
Updated on Jan 21, 2021

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.