Please use this identifier to cite or link to this item:
|Title:||Improved Selectivity and Sensitivity of Gas Sensing Using a 3D Reduced Graphene Oxide Hydrogel with an Integrated Microheater||Authors:||Wu, Jin
Norford, Leslie K.
|Keywords:||Reduced graphene oxide hydrogel
|Issue Date:||2015||Source:||Wu, J., Tao, K., Miao, J., & Norford, L. K. (2015). Improved Selectivity and Sensitivity of Gas Sensing Using a 3D Reduced Graphene Oxide Hydrogel with an Integrated Microheater. ACS Applied Materials & Interfaces, 7(49), 27502-27510.||Series/Report no.:||ACS Applied Materials & Interfaces||Abstract:||Low-cost, one-step, and hydrothermal synthesized 3D reduced graphene oxide hydrogel (RGOH) is exploited to fabricate a high performance NO2 and NH3 sensor with an integrated microheater. The sensor can experimentally detect NO2 and NH3 at low concentrations of 200 ppb and 20 ppm, respectively, at room temperature. In addition to accelerating the signal recovery rate by elevating the local silicon substrate temperature, the microheater is exploited for the first time to improve the selectivity of NO2 sensing. Specifically, the sensor response from NH3 can be effectively suppressed by a locally increased temperature, while the sensitivity of detecting NO2 is not significantly affected. This leads to good discrimination between NO2 and NH3. This strategy paves a new avenue to improve the selectivity of gas sensing by using the microheater to raise substrate temperature.||URI:||https://hdl.handle.net/10356/81603
|ISSN:||1944-8244||DOI:||10.1021/acsami.5b09695||Rights:||© 2015 American Chemical Society. This paper was published in ACS Applied Materials and Interfaces and is made available as an electronic reprint (preprint) with permission of American Chemical Society. The published version is available at: [http://dx.doi.org/10.1021/acsami.5b09695]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Journal Articles|
Files in This Item:
|Improved Selectivity and Sensitivity of Gas Sensing Using a 3D Reduced Graphene Oxide Hydrogel with an Integrated Microheater.pdf||5.01 MB||Adobe PDF|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.