Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/82503
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNi, Haibinen
dc.contributor.authorYuan, Guanghuien
dc.contributor.authorSun, Liangdongen
dc.contributor.authorChang, Ningen
dc.contributor.authorZhang, Dien
dc.contributor.authorChen, Ruipengen
dc.contributor.authorJiang, Liyongen
dc.contributor.authorChen, Hongyuanen
dc.contributor.authorGu, Zhongzeen
dc.contributor.authorZhao, Xiangweien
dc.date.accessioned2019-04-17T05:59:50Zen
dc.date.accessioned2019-12-06T14:56:54Z-
dc.date.available2019-04-17T05:59:50Zen
dc.date.available2019-12-06T14:56:54Z-
dc.date.issued2018en
dc.identifier.citationNi, H., Yuan, G., Sun, L., Chang, N., Zhang, D., Chen, R., . . . Zhao, X. (2018). Large-scale high-numerical-aperture super-oscillatory lens fabricated by direct laser writing lithography. RSC Advances, 8(36), 20117-20123. doi:10.1039/c8ra02644ken
dc.identifier.urihttps://hdl.handle.net/10356/82503-
dc.identifier.urihttp://hdl.handle.net/10220/48043en
dc.description.abstractIn this study, direct laser writing (DLW) lithography is employed to fabricate a large-scale and high-numerical-aperture super-oscillatory lens (SOL), which is capable of achieving a sub-Abbe–Rayleigh diffraction limit focus in the optical far-field region by delicate interference. Large-diameter (600 μm), amplitude-modulated and phase-type SOLs with the smallest annular ring width of 1 μm are fabricated, and they have high quality. The dependence of DLW printing on the fabrication parameters including substrate materials, laser power, and scanning speed is well investigated. A standard procedure to manufacture high-quality binary amplitude SOLs is presented, which avoids direct printing patterns on metal films and reduces the surface roughness dramatically. Random displacements between squares constituting SOLs are discussed, and their influence on the focusing performance is studied by both numerical simulations and experiments. The optical performances of the SOLs fabricated by the DLW method are experimentally characterized, and a needle-like focus with a spot size of 0.42λ and a depth of focus of ∼6 μm are confirmed at a working distance of 100 μm for λ = 633 nm, thus giving an effective numerical aperture as high as 1.19 in air. As a complementary sub-micrometer fabrication method between traditional lithography and nanofabrication method, DLW is proved to be a promising approach to manufacture SOLs, presenting advantages of relatively high speed, low equipment volume, less complexity and sub-micrometer lateral resolution. Such SOLs can be very useful in high resolution bio-imaging on rough surfaces and in the related research fields.en
dc.description.sponsorshipASTAR (Agency for Sci., Tech. and Research, S’pore)en
dc.description.sponsorshipMOE (Min. of Education, S’pore)en
dc.format.extent7 p.en
dc.language.isoenen
dc.relation.ispartofseriesRSC Advancesen
dc.rights© 2018 The Royal Society of Chemistry. This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence.en
dc.subjectDiffractionen
dc.subjectDirect Laser Writingen
dc.subjectDRNTU::Science::Physicsen
dc.titleLarge-scale high-numerical-aperture super-oscillatory lens fabricated by direct laser writing lithographyen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Physical and Mathematical Sciencesen
dc.identifier.doihttp://dx.doi.org/10.1039/C8RA02644Ken
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:SPMS Journal Articles

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.