Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/82848
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFong, Kai Soonen
dc.contributor.authorTan, Ming Jenen
dc.contributor.authorNg, Fern Lanen
dc.contributor.authorDanno, Atsushien
dc.contributor.authorChua, Beng Wahen
dc.date.accessioned2019-07-02T09:13:45Zen
dc.date.accessioned2019-12-06T15:06:49Z-
dc.date.available2019-07-02T09:13:45Zen
dc.date.available2019-12-06T15:06:49Z-
dc.date.issued2017en
dc.identifier.citationFong, K. S., Tan, M. J., Ng F. L., Danno, A., & Chua, B. W. (2017). Microstructure Stability of a Fine-Grained AZ31 Magnesium Alloy Processed by Constrained Groove Pressing During Isothermal Annealing. Journal of Manufacturing Science and Engineering, 139(8), 081007-. doi:10.1115/1.4036529en
dc.identifier.issn1087-1357en
dc.identifier.urihttps://hdl.handle.net/10356/82848-
dc.description.abstractIn this study, an AZ31 magnesium alloy plate was processed by constrained groove pressing (CGP) under three deformation cycles at temperatures from 503 to 448 K. The process resulted in a homogeneous fine grain microstructure with an average grain size of 1.8 μm. The as-processed microstructure contained a high fraction of low-angle grain boundaries (LAGB) of subgrains and dislocation boundaries that remained in the structure due to incomplete dynamic recovery and recrystallization. The material's yield strength was found to have increased from 175 to 242 MPa and with a significant weakening of its initial basal texture. The microstructure stability of the CGP-processed material was further investigated by isothermal annealing at temperature from 473 to 623 K and for different time. Abnormal grain growth was observed at 623 K, and this was associated with an increased in nonbasal grains at the expense of basal grains. The effect of annealing temperature and time on the grain growth kinetics was interpreted by using the grain growth equation, Dn+Dn0=kt, and Arrhenius equation, k=k0 exp (−(Q/RT)). The activation energy (Q) was estimated to be 27.8 kJ/mol which was significantly lower than the activation energy for lattice self-diffusion (QL = 135 kJ/mol) and grain boundary diffusion (Qgb = 92 kJ/mol) in pure magnesium. The result shows that grain growth is rapid but average grain size still remained smaller than the as-received material, especially at the shorter annealing time.en
dc.language.isoenen
dc.relation.ispartofseriesJournal of Manufacturing Science and Engineeringen
dc.rights© 2017 ASME. All rights reserved.en
dc.subjectEngineering::Mechanical engineeringen
dc.subjectMagnesium Alloyen
dc.subjectGrain Growth Kineticsen
dc.titleMicrostructure stability of a fine-grained AZ31 magnesium alloy processed by constrained groove pressing during isothermal annealingen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.1115/1.4036529en
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:MAE Journal Articles

SCOPUSTM   
Citations 20

7
Updated on Sep 5, 2020

PublonsTM
Citations

10
Updated on Nov 24, 2020

Page view(s)

40
Updated on Dec 1, 2020

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.