Please use this identifier to cite or link to this item:
https://hdl.handle.net/10356/83061
Title: | Controlled self-assembly of Ni foam supported poly(ethyleneimine)/reduced graphene oxide three-dimensional composite electrodes with remarkable synergistic effects for efficient oxygen evolution | Authors: | Zhao, Ming Yuan, Weiyong Li, Chang Ming |
Keywords: | Synergistic interaction Catalysts |
Issue Date: | 2017 | Source: | Zhao, M., Yuan, W., & Li, C. M. (2017). Controlled self-assembly of Ni foam supported poly(ethyleneimine)/reduced graphene oxide three-dimensional composite electrodes with remarkable synergistic effects for efficient oxygen evolution. Journal of Materials Chemistry A, 3(5), 1201-1210. | Series/Report no.: | Journal of Materials Chemistry A | Abstract: | Three-dimensional (3-D) composite oxygen evolution electrodes with synergistic effects are promising to significantly boost the efficiency of the oxygen evolution reaction (OER). However, their fabrication presents great challenges. Herein, for the first time we show that layer-by-layer (LbL) self-assembly on 3-D substrates can be employed to controllably fabricate 3-D composite electrodes. Ni foam (NF) supported poly(ethyleneimine) (PEI)/reduced graphene oxide (RGO) multilayers fabricated via this approach have tunable catalytic properties. The optimum one achieves the current density of 10 mA cm−2 at an overpotential of 322 mV, which is lower than those of most reported transition metal-based OER catalysts and non-metal ones as well as those of state-of-the-art Ir/C, Ru/C, IrO2/C, and RuO2 measured under the same conditions (0.1 M KOH). It shows a Tafel slope of 78 mV dec−1, which is among the lowest reported for transition metal-based OER catalysts and non-metal ones and comparable to or even lower than that of state-of-the-art Ir and Ru-based ones measured in 0.1 M KOH. In addition, this electrode exhibits a potential increase from 0.55 V to 0.58 V vs. SCE after 18.8 h of chronopotentiometry testing at 10 mA cm−2 and retains 85.8% of the current density at 1.0 V vs. SCE after 350 CV cycles, revealing its good stability. The high catalytic performance could be attributed to in situ formed Ni(OH)2 with RGO-promoted activity, high-density C[double bond, length as m-dash]O rich edge-exposed RGO nanosheets, and the covalently crosslinked multilayer structure of chemically stable RGO nanosheets. All of these properties arise from synergistic interactions between NF, PEI, and RGO. This work offers a facile, mild, controllable, and economical strategy to synergistically assemble conventional poor OER catalysts for low-cost, highly active, and durable 3-D OER electrodes. It also provides scientific insight into the mechanism for the superior and tunable OER catalytic activity, which is critical for further improving the OER catalytic performance. | URI: | https://hdl.handle.net/10356/83061 http://hdl.handle.net/10220/42395 |
ISSN: | 2050-7488 | DOI: | 10.1039/C6TA08972K | Schools: | School of Electrical and Electronic Engineering | Rights: | © 2017 The Royal Society of Chemistry. | Fulltext Permission: | none | Fulltext Availability: | No Fulltext |
Appears in Collections: | EEE Journal Articles |
SCOPUSTM
Citations
10
35
Updated on Mar 6, 2024
Web of ScienceTM
Citations
10
31
Updated on Oct 31, 2023
Page view(s)
278
Updated on Mar 18, 2024
Google ScholarTM
Check
Altmetric
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.