Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/84037
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSubiantoro, Aen
dc.contributor.authorOoi, Kim Tiowen
dc.date.accessioned2016-10-21T08:14:06Zen
dc.date.accessioned2019-12-06T15:36:58Z-
dc.date.available2016-10-21T08:14:06Zen
dc.date.available2019-12-06T15:36:58Z-
dc.date.issued2015en
dc.identifier.citationSubiantoro, A., & Ooi, K. T. (2015). Study of torque matching of revolving vane compressor and expander. IOP Conference Series: Materials Science and Engineering, 90, 012037-.en
dc.identifier.issn1757-899Xen
dc.identifier.urihttps://hdl.handle.net/10356/84037-
dc.description.abstractAn investigation was carried out to find the most optimum configuration, particularly the torque matching characteristics, of an integrated Revolving Vane compressor- expander. To carry out the study, a mathematical model of the integrated compressor-expander was developed. An open cycle air refrigeration system was adopted. The controlled parameter was the angle shift between the compressor and the expander. The observed parameters were the peak torque requirement and the bearing load. The results show that when properly matched, the peak torque can be reduced by more than 65% while the bearing loads can be reduced by up to 25%, depending on operating conditions. Unfortunately, the optimum angle shifts for peak torque do not always coincide with those for bearing load. When the pressure and inertial components of the torques are comparable or when the inertial component is dominant, the optimum angle shifts for peak torque and bearing load are around 180° and 330°, respectively. When the pressure component is dominant, the optimum angle shift for peak torque is equal to the angle difference between the pressure peak torques of the compressor and the expander while for bearing load is around 150°.en
dc.description.sponsorshipNRF (Natl Research Foundation, S’pore)en
dc.format.extent11 p.en
dc.language.isoenen
dc.relation.ispartofseriesIOP Conference Series: Materials Science and Engineeringen
dc.rights© 2015 The Author(s) (IOP Publishing). Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.en
dc.subjectIntegrated compressorsen
dc.subjectTorqueen
dc.titleStudy of torque matching of revolving vane compressor and expanderen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.1088/1757-899X/90/1/012037en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:MAE Journal Articles
Files in This Item:
File Description SizeFormat 
Study of torque matching of revolving vane compressor and expander.pdf1.54 MBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations 20

2
Updated on Aug 31, 2020

PublonsTM
Citations 50

1
Updated on Dec 4, 2020

Page view(s) 50

153
Updated on Dec 4, 2020

Download(s) 50

56
Updated on Dec 4, 2020

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.