Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/84038
Full metadata record
DC FieldValueLanguage
dc.contributor.authorOoi, Kim Tiowen
dc.contributor.authorYap, K. S.en
dc.date.accessioned2016-10-21T08:01:27Zen
dc.date.accessioned2019-12-06T15:37:00Z-
dc.date.available2016-10-21T08:01:27Zen
dc.date.available2019-12-06T15:37:00Z-
dc.date.issued2015en
dc.identifier.citationOoi, K. T., & Yap, K. S. (2015). Design Evolution: From Rolling Piston to Revolving Vane to Cross-Vane Expander-compressor unit. IOP Conference Series: Materials Science and Engineering, 90, 012036-.en
dc.identifier.issn1757-899Xen
dc.identifier.urihttps://hdl.handle.net/10356/84038-
dc.description.abstractIn this paper the design evolution from rolling piston compressor (RP) to revolving vane compressor (RV) and finally to cross-vane expander-compressor unit (CVEC) is presented and discussed. The details in the design philosophy which initiated this evolution will be presented and discussed. It is estimated that more than 90% of the room air-conditioners uses RP in its compressor. This is because of its advantages: it has the few parts, it is simple geometrically and it is reliable. However, it is with no weaknesses. RP's weaknesses lie in three parts: too many rubbing surfaces with high relative rubbing velocity with each other which give rise to high frictional losses; components (eccentric and roller) are not rotating at their centres and resulted in unnecessary inherent vibration; vane tip is constantly rubbing against the roller making it a weakest part in design. To overcome RP's weaknesses, RV is introduced. As compared to RP, RV has fewer rubbing surfaces, and the relative velocities among these surfaces are reduced Components in RV rotate at their own centres and there is no inherent vibration; the rubbing at the vane tip has been eliminated completely. However, like RP, RV also has a large rotor which occupied "useful" space and making the working chamber relatively small. To overcome this latter problem, CVEC is introduced. In this newly invented CVCE, not only parts are all concentric and rotate at their own centres, the unit also recovers expansion energy and hence significantly reduces energy required by the refrigeration systems. And, more importantly, all these are carried out not at the expense of the additional cost. In this paper, details on these three compressors are explained, compared and their respective uniqueness are shown and discussed.en
dc.format.extent9 p.en
dc.language.isoenen
dc.relation.ispartofseriesIOP Conference Series: Materials Science and Engineeringen
dc.rights© 2015 The Author(s) (IOP Publishing). Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.en
dc.subjectExpander-compressoren
dc.subjectPistonsen
dc.titleDesign Evolution: From Rolling Piston to Revolving Vane to Cross-Vane Expander-compressor uniten
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.1088/1757-899X/90/1/012036en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:MAE Journal Articles

SCOPUSTM   
Citations 50

3
Updated on Jul 11, 2024

Web of ScienceTM
Citations 50

2
Updated on Oct 31, 2023

Page view(s) 50

518
Updated on Jul 12, 2024

Download(s) 50

159
Updated on Jul 12, 2024

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.