Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/84212
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShuai, Lien
dc.contributor.authorQingsong, Weien
dc.contributor.authorZhang, D. Qen
dc.contributor.authorKai, Chua Cheeen
dc.date.accessioned2016-12-02T08:51:43Zen
dc.date.accessioned2019-12-06T15:40:40Z-
dc.date.available2016-12-02T08:51:43Zen
dc.date.available2019-12-06T15:40:40Z-
dc.date.issued2014en
dc.identifier.citationShuai, L., Qingsong, W., Zhang, D. Q., & Kai, C. C. (2014). Microstructures and Texture of Inconel 718 Alloy Fabricated by Selective Laser Melting. Proceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014), 139-144.en
dc.identifier.urihttps://hdl.handle.net/10356/84212-
dc.identifier.urihttp://hdl.handle.net/10220/41667en
dc.description.abstractInconel 718 nick base superalloy samples were fabricated by selective laser melting from the powder. The microstructure examinations reveal that fine cellular and dendritic structures with a size smaller than 1µm were formed in the laser track due to the rapid cooling speed. In order to investigate the influence of the anisotropy, two scanning strategies were used namely bidirectional and rotate 90° between neighboring layers in this study. The Inverse Polar Figure (IPF) acquired by electron backscatter diffraction (EBSD) proves that both of them show strong texture long the building directional. However, the texture can be significantly reduced by adjusting the scanning strategies.en
dc.format.extent6 p.en
dc.language.isoenen
dc.rights© 2014 by Research Publishing Services.en
dc.subjectAdditive manufacturingen
dc.subjectSelective laser meltingen
dc.titleMicrostructures and Texture of Inconel 718 Alloy Fabricated by Selective Laser Meltingen
dc.typeConference Paperen
dc.contributor.conferenceProceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014)en
dc.contributor.researchSingapore Centre for 3D Printingen
dc.contributor.researchNTU Additive Manufacture Centreen
dc.identifier.doi10.3850/978-981-09-0446-3_021en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:Pro-AM Conference Papers
Files in This Item:
File Description SizeFormat 
Micorstructures and texture of inconel 718 alloy fabricated by selective laser melting.pdf852.33 kBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.