Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/84228
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTan, Xipengen
dc.contributor.authorKok, Yihongen
dc.contributor.authorTor, Shu Bengen
dc.contributor.authorChua, Chee Kaien
dc.date.accessioned2016-12-06T04:31:04Zen
dc.date.accessioned2019-12-06T15:40:57Z-
dc.date.available2016-12-06T04:31:04Zen
dc.date.available2019-12-06T15:40:57Z-
dc.date.issued2014en
dc.identifier.citationTan, X., Kok, Y., Tor, S. B., & Chua, C. K. (2014). Application of Electron Beam Melting (EBM) in Additive Manufacturing of an Impeller. Proceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014), 327-332.en
dc.identifier.urihttps://hdl.handle.net/10356/84228-
dc.description.abstractAn industrial impeller has been successfully fabricated by using Ti-6Al-4V ELI powder via a newly installed Arcam A2XX electron beam melting (EBM) machine. EBM was found to be preferable to build the circular or complex-shaped parts with thin walls. Several problems that frequently take place during the EBM fabrication are proposed based on the practical experience. It is found that metallization peeling-off, warpage, “swelling” and arc trips are the main reasons resulting in the failures of building jobs. It is suggested to pay close attention to the following aspects: a thorough cleanliness of the entire EBM system before start, a reasonable placement of builds on the start plate, an optimized design on geometries, etc., for a successfully built part.en
dc.format.extent6 p.en
dc.language.isoenen
dc.rights© 2014 by Research Publishing Services.en
dc.subjectAdditive manufacturingen
dc.subjectElectron beam meltingen
dc.titleApplication of Electron Beam Melting (EBM) in Additive Manufacturing of an Impelleren
dc.typeConference Paperen
dc.contributor.conferenceProceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014)en
dc.contributor.researchSingapore Centre for 3D Printingen
dc.identifier.doi10.3850/978-981-09-0446-3_076en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:Pro-AM Conference Papers
Files in This Item:
File Description SizeFormat 
Application of electron beam melting (EBM) in additive manufacturing of an impeller.pdf2.22 MBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.