Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZhao, Changxuanen
dc.contributor.authorJariwala, Amit S.en
dc.contributor.authorRosen, David W.en
dc.identifier.citationZhao, C., Jariwala, A. S., & Rosen, D. W. (2016). Real Time Monitoring Of Exposure Controlled Projection Lithography. Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016), 557-562.en
dc.description.abstractExposure Controlled Projection Lithography (ECPL) is a stereolithographic process in which lens shaped features are fabricated from Photopolymer resin. During the fabrication process, a dynamic mask is used to control and project radiation patterns through a transparent substrate onto the photopolymer resin to grow the features progressively from the substrate surface. We present a novel method to monitor the photopolymerization process in real-time with spatial resolution in a plane perpendicular to the growth of polymerization. A transparent Spatial Light Modulator (SLM) was incorporated into our Interferometric Cure Monitoring (ICM) system, an interferometric monitoring system which is used to measure the cured part height. The introduction of SLM enabled multiple point which could not be achieved by the traditional manually operated iris. This improved ICM system fulfilled the need of selectively scanning the curing area and estimating the height and width of the cured part at a specific region of interest. This multiple-point-selective monitoring approach is experimentally validated to measure the height at different locations of the cured part in real time, and also the lateral dimensions of the cured part at the substrate level by a scanning process controlled by the SLM.en
dc.format.extent6 p.en
dc.rights© 2016 by Pro-AM 2016 Organizers. Published by Research Publishing, Singaporeen
dc.titleReal Time Monitoring Of Exposure Controlled Projection Lithographyen
dc.typeConference Paperen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.conferenceProceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016)en
dc.contributor.researchSingapore Centre for 3D Printingen
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
Appears in Collections:MAE Conference Papers
Pro-AM Conference Papers
Files in This Item:
File Description SizeFormat 
Real Time Monitoring Of Exposure Controlled Projection Lithography.pdf254.16 kBAdobe PDFThumbnail

Page view(s)

Updated on May 28, 2022

Download(s) 50

Updated on May 28, 2022

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.