Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/84588
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWong, Kin Keongen
dc.contributor.authorHo, Jin Yaoen
dc.contributor.authorLeong, Kai Choongen
dc.contributor.authorWong, Teck Nengen
dc.date.accessioned2016-12-14T03:00:32Zen
dc.date.accessioned2019-12-06T15:47:49Z-
dc.date.available2016-12-14T03:00:32Zen
dc.date.available2019-12-06T15:47:49Z-
dc.date.issued2016en
dc.identifier.citationWong, K. K., Ho, J. Y., Leong, K. C., & Wong, T. N. (2016). Convective Heat Transfer Performance Of Staggered Heat Sink Arrays Fabricated By Selective Laser Melting. Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016), 67-72.en
dc.identifier.urihttps://hdl.handle.net/10356/84588-
dc.description.abstractIn this paper, the forced convective heat transfer performances of heat sinks produced by Selective Laser Melting (SLM) were experimentally investigated. In total, three staggered array heat sinks were fabricated by SLM of aluminium alloy AlSi10Mg powders in Future of Manufacturing Lab 1, Singapore Centre for 3D Printing. The heat sinks which are of different fin geometries, namely, circular, rectangular rounded and aerofoil shaped fins (NACA 4424), were tested in a rectangular air flow channel. The flow channel was designed with large wall-to-fin clearance ratios such that pressure differences across the various heat sinks measured under similar flow conditions are negligible. Experiments performed for mass flow rates ranging from 0.00554 kg/s to 0.0387 kg/s showed that the heat transfer performances of the aerofoil and rectangular rounded heat sinks exceeded those of the circular heat sink. The highest enhancement in heat transfer coefficient of 33.9% was recorded with the rectangular round heat sink as compared to the circular heat sink at mass flow rate 0.0387 kg/s whereas the highest enhancement in heat transfer coefficient of 28.7% was achieved with aerofoil at mass flow rate 0.00554 kg/s. It is suggested that the aerodynamically designed aerofoil shapes resulted in minimal hydraulic resistance which allowed larger air flow rate between the fins with insignificant bypass, thereby improving the heat transfer performances of the heat sinks. On the other hand, vortex shedding due to the blunt edges of the rounded rectangular heat sink was postulated to have resulted in the enhanced heat transfer.en
dc.description.sponsorshipNRF (Natl Research Foundation, S’pore)en
dc.format.extent6 p.en
dc.language.isoenen
dc.rights© 2016 by Pro-AM 2016 Organizers. Published by Research Publishing, Singaporeen
dc.titleConvective Heat Transfer Performance Of Staggered Heat Sink Arrays Fabricated By Selective Laser Meltingen
dc.typeConference Paperen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.conferenceProceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016)en
dc.contributor.researchSingapore Centre for 3D Printingen
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MAE Conference Papers
Pro-AM Conference Papers

Page view(s) 20

569
Updated on Jul 1, 2022

Download(s) 10

291
Updated on Jul 1, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.