Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/85079
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRowinski, Marcinen
dc.contributor.authorSoh, Yeng Chaien
dc.contributor.authorWhite, Timothy Johnen
dc.contributor.authorChieng, Ching Ch.en
dc.contributor.authorZhao, Jiyunen
dc.date.accessioned2017-08-28T05:38:20Zen
dc.date.accessioned2019-12-06T15:56:37Z-
dc.date.available2017-08-28T05:38:20Zen
dc.date.available2019-12-06T15:56:37Z-
dc.date.issued2016en
dc.identifier.citationRowinski, M., Soh, Y. C., White, T. J., Chieng, C. C., & Zhao, J. (2016). Numerical Investigation of Supercritical Water Flow in a 2x2 Rod Bundle Under Non-Uniform Heat Flux. 2016 24th International Conference on Nuclear Engineering.en
dc.identifier.urihttps://hdl.handle.net/10356/85079-
dc.description.abstractGeneration III/III+ nuclear reactors operate with working fluid under subcritical conditions (Tc = 647K, pc = 22.115MPa). The efficiency, limited by the ratio of source and sink temperatures, is restricted by operating below the critical temperature. The supercritical water reactors (SCWRs) are able to rise efficiency limit while operating at the supercritical conditions. The amount of energy carried by working fluid is higher leading to potential efficiency improvement of nearly 30% above current nuclear stations. Therefore, rendering nuclear energy as one of the most efficient decarbonized electrical energy sources with efficiency of 45% and capacity factor of ca. 90%. Typical capacity factors of competing wind turbines and solar PV cells reaches 45% and 15% while the efficiencies 50% and 45%, respectively. In a subcritical reactor a uniform heat flux is generated due to relatively constant fuel moderation. However, due to a change of density during transition from sub- to supercritical conditions, the fuel moderation is uneven along the fuel rod and results in a non-uniform heat generation. The literature on SCWR neutronics suggests higher heat generation at the fuel channel entrance. In this paper we simulated for the first time such non-uniform heat flux generated in a SCWR, we analyze the impacts of such flux on the working medium flow and suggest ways to mitigate negative impacts of non-uniform heat flux. The study was conducted with use of Computational Fluid Dynamics (CFD) software. Obtained results show that the shape of heat flux curve along the channel highly influences the wall temperature distribution along the fuel channel. The differences in maximum wall temperatures can be up to 200K for different curve’s shape. Moreover, the maximum wall temperature is always higher than in default case i.e. when uniform heat flux is applied. It is possible to control the wall temperature distribution by adjusting the shape of heat flux along the axis. Such adjustment can be made by using different enrichment levels along the fuel rod axis, unfortunately any change in power distribution caused rapid temperature increase at the upstream location.en
dc.language.isoenen
dc.rights© 2016 ASME.en
dc.subjectWateren
dc.subjectFlow (Dynamics)en
dc.titleNumerical Investigation of Supercritical Water Flow in a 2x2 Rod Bundle Under Non-Uniform Heat Fluxen
dc.typeConference Paperen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.contributor.schoolSchool of Materials Science & Engineeringen
dc.contributor.conference2016 24th International Conference on Nuclear Engineeringen
dc.identifier.doi10.1115/ICONE24-60204en
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:EEE Conference Papers
MSE Conference Papers

SCOPUSTM   
Citations 50

1
Updated on Mar 5, 2021

Page view(s) 10

667
Updated on Aug 7, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.