Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/85231
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLang, Michaelen
dc.contributor.authorAuer, Corinnaen
dc.contributor.authorCouturier, Karineen
dc.contributor.authorSun, Xiufuen
dc.contributor.authorMcPhail, Stephen J.en
dc.contributor.authorMalkow, Thomasen
dc.contributor.authorFu, Qingxien
dc.contributor.authorLiu, Qinglinen
dc.date.accessioned2019-05-15T02:09:28Zen
dc.date.accessioned2019-12-06T15:59:59Z-
dc.date.available2019-05-15T02:09:28Zen
dc.date.available2019-12-06T15:59:59Z-
dc.date.issued2017en
dc.identifier.citationLang, M., Auer, C., Couturier, K., Sun, X., McPhail, S. J., Malkow, T., . . . Liu, Q. (2017). Quality assurance of solid oxide fuel cell (SOFC) and electrolyser (SOEC) stacks. ECS Transactions, 78(1), 2077-2086. doi:10.1149/07801.2077ecsten
dc.identifier.issn1938-5862en
dc.identifier.urihttps://hdl.handle.net/10356/85231-
dc.description.abstractIn the EU-funded project “Solid oxide cell and stack testing and quality assurance” (SOCTESQA) standardized and industry wide test modules and programs for high temperature solid oxide cells and stacks are being developed. These test procedures can be applied for the fuel cell (SOFC), the electrolysis (SOEC) and in the combined SOFC/SOEC mode. In order to optimize the test modules the project partners have tested identical SOC stacks with the same test programs in several testing campaigns. Altogether 10 pre-normative test modules were developed: Start-up, current-voltage characteristics, electrochemical impedance spectroscopy, reactant utilization, reactant gas composition, temperature sensitivity, operation at constant current, operation at varying current, thermal cycling and shut-down. The test modules were validated by comparing the results in terms of repeatability of the different testing campaigns and in terms of reproducibility among the different partners. Moreover, the results are discussed in context to the test input parameters.en
dc.format.extent10 p.en
dc.language.isoenen
dc.relation.ispartofseriesECS Transactionsen
dc.rights© 2017 The Electrochemical Society. All rights reserved. This paper was published in ECS Transactions and is made available with permission of The Electrochemical Society.en
dc.subjectFuelen
dc.subjectStacksen
dc.subjectDRNTU::Engineering::Mechanical engineeringen
dc.titleQuality assurance of solid oxide fuel cell (SOFC) and electrolyser (SOEC) stacksen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.1149/07801.2077ecsten
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MAE Journal Articles
Files in This Item:
File Description SizeFormat 
Quality Assurance of Solid Oxide Fuel Cell.pdf453.06 kBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.