Please use this identifier to cite or link to this item:
|Title:||Spark-plasma-sintering (SPS) of nanostructured and submicron titanium oxide powders||Authors:||Angerer, P.
Yu, L. G.
Khor, Khiam Aik
|Keywords:||DRNTU::Engineering::Mechanical engineering||Issue Date:||2004||Source:||Angerer, P., Yu, L. G., Khor, K. A., & Krumpel, G. (2004). Spark-plasma-sintering (SPS) of nanostructured and submicron titanium oxide powders. Materials Science and Engineering: A, 381(1-2), 16–19.||Series/Report no.:||Materials science and engineering: A||Abstract:||Spark-plasma-sintering (SPS) consolidation of submicron and nanostructured titanium oxide (TiO2) powders was performed between 800 and 1000 °C for 1 min. The results were compared with conventional sintering using electrical resistant furnace that was performed between 600 and 1000 °C for 120 min. The compacted samples were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). This investigation clearly shows that the SPS method is capable of obtaining samples with high densities and corresponding fine grain-size from nanostructured raw TiO2 powder. Remarkable difference in the sintering techniques was observed in samples with >95% theoretical density where the relative grain growth quotient d/do for the 40 nm powder was ∼3 when SPS was employed while the value obtained for conventional sintering was ∼26.||URI:||https://hdl.handle.net/10356/85654
|DOI:||10.1016/j.msea.2004.02.009||Rights:||© 2004 Elsevier. This is the author created version of a work that has been peer reviewed and accepted for publication by Materials Science and Engineering: A, Elsevier. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: DOI [http://dx.doi.org/10.1016/j.msea.2004.02.009].||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Journal Articles|
Files in This Item:
|3. Spark-Plasma-Sintering (SPS) of Nanostructured and Submicron.pdf||298.6 kB||Adobe PDF|
Updated on Mar 20, 2023
Web of ScienceTM
Updated on Mar 24, 2023
Page view(s) 5849
Updated on Mar 26, 2023
Updated on Mar 26, 2023
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.