Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/86057
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPandiyan, Vigneashwaraen
dc.contributor.authorTjahjowidodo, Tegoehen
dc.contributor.authorCaesarendra, Wahyuen
dc.contributor.authorPraveen, Gunasekaranen
dc.contributor.authorWijaya, Tomien
dc.contributor.authorK Pappachan, Bobbyen
dc.date.accessioned2019-06-19T03:18:33Zen
dc.date.accessioned2019-12-06T16:15:12Z-
dc.date.available2019-06-19T03:18:33Zen
dc.date.available2019-12-06T16:15:12Z-
dc.date.issued2018en
dc.identifier.citationPandiyan, V., Tjahjowidodo, T., Caesarendra, W., Praveen, G., Wijaya, T., & K Pappachan, B. (2018). Analysis of contact conditions based on process parameters in robotic abrasive belt grinding using dynamic pressure sensor. 2018 Joint 10th International Conference on Soft Computing and Intelligent Systems (SCIS) and 19th International Symposium on Advanced Intelligent Systems (ISIS). doi:10.1109/SCIS-ISIS.2018.00192en
dc.identifier.urihttps://hdl.handle.net/10356/86057-
dc.identifier.urihttp://hdl.handle.net/10220/48820en
dc.description.abstractThe material removal in complicated geometries is the principal objective for machining with compliant abrasive tools in aerospace industries. Realizing ideal material removal rates with fine tolerance in tertiary finishing process such as abrasive belt grinding is essential. This makes it fundamental to look in more detail at the process parameters/variables that affect the material removal rate. However, the relationship between the material removal rate and process parameters is not well understood. Previously, five parameters such as belt speed, feed, rubber hardness, grit size and force applied were studied in correspondence with the depth of cut, and it was found grit size plays a dominant role in the grinding process [1]. In this study, the influence of four parameters out the five parameters namely belt speed, feed, rubber hardness and force are investigated using a dynamic pressure sensor. Three level of input for each parameter was considered. Experimental trials were conducted by varying the levels of one parameter and maintaining a constant level for other three parameters. Based on the experimental trials performed using the dynamic pressure sensor, a correlation between the three levels considered for each parameter is identified based on the contact conditions. It was observed that pressure distribution based on the contact condition using the pressure sensor for the parameter considered followed the same results as predicted by ANOVA [1]. This research work describes a systematic approach to analyse process parameters based on contact conditions using a pressure sensor to understand material removal in a compliant abrasive belt grinding process.en
dc.description.sponsorshipNRF (Natl Research Foundation, S’pore)en
dc.format.extent5 p.en
dc.language.isoenen
dc.rights© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The published version is available at: https://doi.org/10.1109/SCIS-ISIS.2018.00192en
dc.subjectBeltsen
dc.subjectMachine Toolsen
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen
dc.titleAnalysis of contact conditions based on process parameters in robotic abrasive belt grinding using dynamic pressure sensoren
dc.typeConference Paperen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.conference2018 Joint 10th International Conference on Soft Computing and Intelligent Systems (SCIS) and 19th International Symposium on Advanced Intelligent Systems (ISIS)en
dc.identifier.doihttp://dx.doi.org/10.1109/SCIS-ISIS.2018.00192en
dc.description.versionAccepted versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MAE Conference Papers

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.