Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/86583
Full metadata record
DC FieldValueLanguage
dc.contributor.authorYap, Yee Lingen
dc.contributor.authorWang, Chengchengen
dc.contributor.authorSing, Swee Leongen
dc.contributor.authorDikshit, Vishweshen
dc.contributor.authorYeong, Wai Yeeen
dc.contributor.authorWei, Junen
dc.date.accessioned2017-12-08T06:11:42Zen
dc.date.accessioned2019-12-06T16:25:14Z-
dc.date.available2017-12-08T06:11:42Zen
dc.date.available2019-12-06T16:25:14Z-
dc.date.issued2017en
dc.identifier.citationYap, Y. L., Wang, C., Sing, S. L., Dikshit, V., Yeong, W. Y., & Wei, J. (2017). Material jetting additive manufacturing: An experimental study using designed metrological benchmarks. Precision Engineering, 50, 275-285.en
dc.identifier.issn0141-6359en
dc.identifier.urihttps://hdl.handle.net/10356/86583-
dc.description.abstractAdditive manufacturing (AM) technique allows the creation of parts with a high degree of design complexity by building three-dimensional (3D) parts layer-by-layer. Many of the current restrictions of design for manufacturing (DFM) as well as design for assembly (DFA) are no longer applicable for AM due to the lack of needs for tooling. Instead, it is critical to establish the manufacturing limits and design guidelines to achieve optimal production outcomes. This can be achieved through manipulation of process parameters. The purpose of this paper is to establish a systematic methodology for investigating the process capability of material jetting AM techniques by using specially designed benchmark artifacts. In this study, three customized benchmarks were designed to characterize and establish the process capability of material jetting AM techniques. Each of the benchmarks was designed for different purposes. Using a benchmark, metrological studies were conducted to determine the effect of process parameters on the dimensional accuracy of fabricated part. The design limitations on special features such as thin walls and assembly-free parts fabricated using different build orientations were also evaluated.en
dc.description.sponsorshipASTAR (Agency for Sci., Tech. and Research, S’pore)en
dc.format.extent39 p.en
dc.language.isoenen
dc.relation.ispartofseriesPrecision Engineeringen
dc.rights© 2017 Elsevier Inc. This is the author created version of a work that has been peer reviewed and accepted for publication by Precision Engineering, Elsevier Inc. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1016/j.precisioneng.2017.05.015].en
dc.subject3D Printingen
dc.subjectAdditive Manufacturingen
dc.titleMaterial jetting additive manufacturing: An experimental study using designed metrological benchmarksen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.organizationA*STAR SIMTechen
dc.contributor.researchSingapore Centre for 3D Printingen
dc.identifier.doi10.1016/j.precisioneng.2017.05.015en
dc.description.versionAccepted versionen
dc.identifier.rims201279en
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:MAE Journal Articles

SCOPUSTM   
Citations 5

107
Updated on Dec 2, 2022

Web of ScienceTM
Citations 5

98
Updated on Dec 2, 2022

Page view(s) 50

426
Updated on Dec 7, 2022

Download(s) 5

795
Updated on Dec 7, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.