Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/87358
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMa, Shuqien
dc.contributor.authorAziz, Najen
dc.contributor.authorNemcik, Janen
dc.contributor.authorMirzaghorbanali, Alien
dc.date.accessioned2018-02-06T08:34:16Zen
dc.date.accessioned2019-12-06T16:40:14Z-
dc.date.available2018-02-06T08:34:16Zen
dc.date.available2019-12-06T16:40:14Z-
dc.date.issued2017en
dc.identifier.citationMa, S., Aziz, N., Nemcik, J., & Mirzaghorbanali, A. (2017). The Effects of Installation Procedure on Bond Characteristics of Fully Grouted Rock Bolts. Geotechnical Testing Journal, 40(5), 846-857.en
dc.identifier.issn0149-6115en
dc.identifier.urihttps://hdl.handle.net/10356/87358-
dc.description.abstractThe bond characteristics of fully grouted rockbolts installed in steel tubes were investigated by bolt push tests. Steel tubes were inserted in a mine roadway roof to represent the confinement of rock boreholes. Rockbolts were installed in tubes using the installation technique of Australian underground mines. These tubes, with rockbolts inside, were retrieved from the field and brought back to the laboratory to be cut into 100-mm sections, which were then push tested. It was found that each bolt section had a distinct load-displacement profile, and that bond strength varied significantly along the bolt length. The factors influencing the bond strength of rockbolts were identified. The influence of the installation procedure on the bond strength of bolts in tubes was investigated.en
dc.format.extent12 p.en
dc.language.isoenen
dc.relation.ispartofseriesGeotechnical Testing Journalen
dc.rights© 2017 ASTM International. This paper was published in Geotechnical Testing Journal and is made available as an electronic reprint (preprint) with permission of ASTM International. The published version is available at: [http://dx.doi.org/10.1520/GTJ20160239]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.subjectFully Grouted Rockboltsen
dc.subjectPush Testsen
dc.titleThe Effects of Installation Procedure on Bond Characteristics of Fully Grouted Rock Boltsen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Civil and Environmental Engineeringen
dc.identifier.doi10.1520/GTJ20160239en
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:CEE Journal Articles

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.