Please use this identifier to cite or link to this item:
Title: Active/Reactive Power Control of Photovoltaic Grid-Tied Inverters with Peak Current Limitation and Zero Active Power Oscillation during Unbalanced Voltage Sags
Authors: Dehghani Tafti, Hossein
Maswood, Ali Iftekhar
Konstantinou, Georgios
Pou, Josep
Acuña, Pablo
Keywords: Photovoltaic Power Plants
Grid Voltage Sag
Issue Date: 2018
Source: Dehghani Tafti, H., Maswood, A. I., Konstantinou, G., Pou, J., & Acuña, P. (2018). Active/Reactive Power Control of Photovoltaic Grid-Tied Inverters with Peak Current Limitation and Zero Active Power Oscillation during Unbalanced Voltage Sags. IET Power Electronics, 11(6), 1066-1073.
Series/Report no.: IET Power Electronics
Abstract: This paper proposes an analytical expression for the calculation of active and reactive power references of a grid-tied inverter, which limits the peak current of the inverter during voltage sags. The key novelty is that the active/reactive power references are analytically calculated based on the dc-link voltage and grid codes, while they do not depend on the implemented current reference calculation algorithm and, as a general formulation, can be implemented in combination with various current reference calculation algorithms. Furthermore, based on the inverter nominal current and the injected reactive power to the grid during voltage sags, an analytical algorithm is introduced for the calculation of the active power reference, which can be extracted from PV strings. The proposed algorithm ensures that the maximum current capability of the inverter is used for the enhancement of the grid voltages during voltage sags, while it always complies with the reactive power injection requirement of grid codes and avoids increasing the dc-link voltage excessively. An unbalanced current injection algorithm is also applied for the grid-tied inverter which results in zero active power oscillation. Experimental results of a grid-connected 3.3-kVA, three-level, neutral-point-clamped inverter laboratory prototype under several voltage sag conditions are presented to demonstrate the effectiveness of the proposed controller.
ISSN: 1755-4535
DOI: 10.1049/iet-pel.2017.0210
Rights: © 2018 The Institution of Engineering and Technology. This is the author created version of a work that has been peer reviewed and accepted for publication by IET Power Electronics, The Institution of Engineering and Technology. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [].
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:EEE Journal Articles

Citations 10

Updated on Sep 4, 2020

Citations 10

Updated on Mar 4, 2021

Page view(s) 50

Updated on Jan 21, 2022

Download(s) 5

Updated on Jan 21, 2022

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.