Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/87547
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWang, Pingen
dc.contributor.authorShen, Zhongxiangen
dc.date.accessioned2018-08-03T07:40:42Zen
dc.date.accessioned2019-12-06T16:44:16Z-
dc.date.available2018-08-03T07:40:42Zen
dc.date.available2019-12-06T16:44:16Z-
dc.date.issued2018en
dc.identifier.citationWang, P., & Shen, Z. (2018). End-fire surface wave antenna with metasurface coating. IEEE Access, 6, 23778-23785.en
dc.identifier.urihttps://hdl.handle.net/10356/87547-
dc.description.abstractThis paper describes a wideband and low-profile end-fire surface wave antenna embedded into a large metallic platform. It consists of a tapered grounded slab fed by a wideband surface wave launcher and coated with a planar gradient metasurface (MS). It is found that by altering the surface reactance of the MS array, the surface wave propagating in the grounded slab can be manipulated to suppress the radiation of TM1 mode region at a specific high frequency. A simple design procedure of MS array is then developed. In addition, a blind-filled cylinder hole is used to further improve the radiation pattern at certain high frequencies. A prototype of the proposed antenna is finally fabricated and tested. Measured results are in good agreement with simulated ones, and they show that the surface wave antenna has a very wide bandwidth from 3.78 to 18.54 GHz for voltage standing wave ratio <; 2.5 and exhibits a low profile of only 5 mm (0.063 λL, λL is the free-space wavelength at the lowest operating frequency). Good radiation pattern and high gain are achieved over a wide frequency band.en
dc.format.extent8 p.en
dc.language.isoenen
dc.relation.ispartofseriesIEEE Accessen
dc.rights© 2018 IEEE. Translations and content mining are permitted for academic research only. Personal use is also permitted, but republication/redistribution requires IEEE permission. See http://www.ieee.org/publications_standards/publications/rights/index.html for more information.en
dc.subjectEnd-fire Antennaen
dc.subjectGradient Metasurfaceen
dc.titleEnd-fire surface wave antenna with metasurface coatingen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.identifier.doi10.1109/ACCESS.2018.2827199en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:EEE Journal Articles
Files in This Item:
File Description SizeFormat 
End-fire surface wave antenna with metasurface coating.pdf10.46 MBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations 20

12
checked on Aug 31, 2020

WEB OF SCIENCETM
Citations 50

9
checked on Sep 17, 2020

Page view(s) 50

123
checked on Sep 24, 2020

Download(s) 50

35
checked on Sep 24, 2020

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.