Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/88254
Title: Effects of slag addition on bond strength of 3D printed geopolymer mortar : an experimental investigation
Authors: Noor Mohamed, Nisar Ahamed
Panda, Biranchi
Tan, Ming Jen
Tay, Daniel Yi Wei
He, Lewei
Keywords: 3D Concrete Printing
DRNTU::Engineering::Civil engineering::Construction technology
Geopolymer
DRNTU::Engineering::Mechanical engineering::Prototyping
Issue Date: 2018
Source: Panda, B., Mohamed, N. A. N., Tay, D. Y. W., He, L., & Tan, M. J. (2018). Effects of slag addition on bond strength of 3D printed geopolymer mortar: an experimental investigation. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 62-67. doi:10.25341/D4QG6D
Conference: Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018)
Abstract: 3D concrete printing is gaining ground in the construction industry. In concrete printing, fresh concrete layers are deposited layer by layer manner like fused deposition modelling process following a computer-aided design (CAD) model. The structural capacity of the printed part mainly depends on the bond strength between the old substrate and new overlaid concrete. Hence, it is essential to measure the inter layer bond strength and its influencing parameters. In this paper, a novel geopolymer ink is considered as reference material, that exhibits thixotropic property, suitable for 3D printing application. The said geopolymer thixotropic build up rate was altered by adding slag in two different percentages. From the experimental outcomes, it was found that, rapid structural build-up and long delay time can cause poor bonding in the interface properties of the printed structure. This delay time depends strongly on the thixotropic behavior, the thickness of the layers and roughness of the interface between the two layers.
URI: https://hdl.handle.net/10356/88254
http://hdl.handle.net/10220/45699
DOI: 10.25341/D4QG6D
Schools: School of Mechanical and Aerospace Engineering 
Research Centres: Singapore Centre for 3D Printing 
Rights: © 2018 Nanyang Technological University. Published by Nanyang Technological University, Singapore.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:Pro-AM Conference Papers

Files in This Item:
File Description SizeFormat 
EFFECTS OF SLAG ADDITION ON BOND STRENGTH OF 3D PRINTED.pdf515.76 kBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations 50

7
Updated on Mar 28, 2024

Web of ScienceTM
Citations 20

6
Updated on Oct 24, 2023

Page view(s) 10

834
Updated on Mar 28, 2024

Download(s) 10

384
Updated on Mar 28, 2024

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.