Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/88271
Full metadata record
DC FieldValueLanguage
dc.contributor.authorQi, Chenen
dc.contributor.authorChen, Xiyouen
dc.contributor.authorTu, Pengfeien
dc.contributor.authorWang, Pengen
dc.date.accessioned2018-08-27T05:38:18Zen
dc.date.accessioned2019-12-06T16:59:33Z-
dc.date.available2018-08-27T05:38:18Zen
dc.date.available2019-12-06T16:59:33Z-
dc.date.issued2017en
dc.identifier.citationQi, C., Chen, X., Tu, P., & Wang, P. (2018). Deadbeat control for a single-phase cascaded H-bridge rectifier with voltage balancing modulation. IET Power Electronics, 11(3), 610-617. doi:10.1049/iet-pel.2016.0933en
dc.identifier.issn1755-4535en
dc.identifier.urihttps://hdl.handle.net/10356/88271-
dc.description.abstractThe model predictive control (MPC) is a promising control method for cascaded H-bridge (CHB) rectifiers. One well-known MPC method is the finite-control-set MPC (FCS-MPC). However, three main issues arise in FCS-MPC: heavy computational burden, low steady-state performance, and time-consuming tuning work of weighting factor. Here, an alternative MPC method, deadbeat (DB) control with a capability of voltage balance, has been proposed for a single-phase CHB rectifier. The proposed method is based on the DB solution to obtain zero current error at the sampling instant and the use of a redundancy-based modulation strategy for voltage balance, leading to the ease of controller design and elimination of tuning work. The proposed method has been evaluated against FCS-MPC method on a single-phase three-cell CHB rectifier. The experimental results show that a reduced computational burden, an improved steady-state performance, and a comparable dynamic response can be achieved in the proposed method in comparison with FCS-MPC method.en
dc.description.sponsorshipNRF (Natl Research Foundation, S’pore)en
dc.format.extent8 p.en
dc.language.isoenen
dc.relation.ispartofseriesIET Power Electronicsen
dc.rights© 2017 The Institution of Engineering and Technology. This paper was published in IET Power Electronics and is made available as an electronic reprint (preprint) with permission of The Institution of Engineering and Technology. The published version is available at: [http://dx.doi.org/10.1049/iet-pel.2016.0933]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.subjectBridge Circuitsen
dc.subjectControl System Synthesisen
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen
dc.titleDeadbeat control for a single-phase cascaded H-bridge rectifier with voltage balancing modulationen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.identifier.doi10.1049/iet-pel.2016.0933en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:EEE Journal Articles

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.