Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/88513
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNguyen, Quy Bauen
dc.contributor.authorZhu, Zhiguangen
dc.contributor.authorSun, Chen-Nanen
dc.contributor.authorWei, Junen
dc.contributor.authorZhou, Weien
dc.contributor.authorNai, Sharon Mui Lingen
dc.date.accessioned2018-09-03T07:27:21Zen
dc.date.accessioned2019-12-06T17:04:57Z-
dc.date.available2018-09-03T07:27:21Zen
dc.date.available2019-12-06T17:04:57Z-
dc.date.issued2017en
dc.identifier.citationNguyen, Q. B., Nai, S. M. L., Zhu, Z., Sun, C.-N., Wei, J., & Zhou, W. (2017). Characteristics of inconel powders for powder-bed additive manufacturing. Engineering, 3(5), 695-700. doi:10.1016/J.ENG.2017.05.012en
dc.identifier.issn2095-8099en
dc.identifier.urihttps://hdl.handle.net/10356/88513-
dc.description.abstractIn this study, the flow characteristics and behaviors of virgin and recycled Inconel powder for powder-bed additive manufacturing (AM) were studied using different powder characterization techniques. The results revealed that the particle size distribution (PSD) for the selective laser melting (SLM) process is typically in the range from 15 μm to 63 μm. The flow rate of virgin Inconel powder is around 28 s·(50 g)−1. In addition, the packing density was found to be 60%. The rheological test results indicate that the virgin powder has reasonably good flowability compared with the recycled powder. The inter-relation between the powder characteristics is discussed herein. A propeller was successfully printed using the powder. The results suggest that Inconel powder is suitable for AM and can be a good reference for researchers who attempt to produce AM powders.en
dc.description.sponsorshipASTAR (Agency for Sci., Tech. and Research, S’pore)en
dc.format.extent6 p.en
dc.language.isoenen
dc.relation.ispartofseriesEngineeringen
dc.rights© 2017 The Author(s). Published by Elsevier LTD on behalf of the Chinese Academy of Engineering and Higher Education Press Limited Company. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).en
dc.subjectPowder Characteristicsen
dc.subjectDRNTU::Engineering::Mechanical engineeringen
dc.subjectAdditive Manufacturingen
dc.titleCharacteristics of inconel powders for powder-bed additive manufacturingen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.organizationA*STAR SIMTechen
dc.identifier.doi10.1016/J.ENG.2017.05.012en
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MAE Journal Articles
Files in This Item:
File Description SizeFormat 
Characteristics of inconel powders for powder-bed additive manufacturing.pdf2.14 MBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations 5

75
Updated on Jul 8, 2022

Web of ScienceTM
Citations 5

70
Updated on Jul 4, 2022

Page view(s) 50

366
Updated on Sep 29, 2022

Download(s) 20

153
Updated on Sep 29, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.