Please use this identifier to cite or link to this item:
|Title:||Industrial design optimisation for 3D printed biomimetic grippers in titanium alloy||Authors:||Thallemer, A.
|Issue Date:||2018||Source:||Thallemer, A., Danzer, M., Diensthuber, D., Kostadinov, A., & Rogler, B. (2018). Industrial design optimisation for 3D printed biomimetic grippers in titanium alloy. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 262-267. doi:10.25341/D4MG6G||Abstract:||Nature has always inspired the creative mind, to a lesser or greater extent. Introduced around the 1950s, Biomimetics served as a systematic method to treat the natural world as a ‘pattern book’ for technical solutions with the aim to create innovative products. Unfortunately, this technique is prone to failure when performed as a mere reverse engineering of a natural system or appearance. Contrary to that, a solution which looks at the principles of a natural design, promises a better outcome. One such example is the here presented case study, which shows the design process of three distinctive grippers. The results show that the fabrication procedure is still in its early stage and thus it is not able to guarantee satisfactory results. To summarize the study, we claim that a novel solution can be derived using principles from nature, however, for the solution to be actualized successfully, there are parameters which are beyond reach for designers. Nonetheless, industrial designers can contribute to product innovation using biomimetics and getting the industrial components additively manufactured. These three gripper designs can only be generatively fabricated. Ti6Al4V is fused by Direct Metal Laser Melting.||URI:||https://hdl.handle.net/10356/88564
|DOI:||10.25341/D4MG6G||Rights:||© 2018 Nanyang Technological University. Published by Nanyang Technological University, Singapore.||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||Pro-AM Conference Papers|
Files in This Item:
|INDUSTRIAL DESIGN OPTIMISATION FOR 3D PRINTED BIOMETRIC GRIPPERS.pdf||1.09 MB||Adobe PDF|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.