Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/88595
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPandiyan, Vigneashwaraen
dc.contributor.authorCaesarendra, Wahyuen
dc.contributor.authorTjahjowidodo, Tegoehen
dc.contributor.authorPraveen, Gunasekaranen
dc.date.accessioned2018-04-12T07:54:41Zen
dc.date.accessioned2019-12-06T17:06:52Z-
dc.date.available2018-04-12T07:54:41Zen
dc.date.available2019-12-06T17:06:52Z-
dc.date.issued2017en
dc.identifier.citationPandiyan, V., Caesarendra, W., Tjahjowidodo, T., & Praveen, G. (2017). Predictive Modelling and Analysis of Process Parameters on Material Removal Characteristics in Abrasive Belt Grinding Process. Applied Sciences, 7(4), 363-.en
dc.identifier.issn2076-3417en
dc.identifier.urihttps://hdl.handle.net/10356/88595-
dc.identifier.urihttp://hdl.handle.net/10220/44674en
dc.description.abstractThe surface finishing and stock removal of complicated geometries is the principal objective for grinding with compliant abrasive tools. To understand and achieve optimum material removal in a tertiary finishing process such as Abrasive Belt Grinding, it is essential to look in more detail at the process parameters/variables that affect the stock removal rate. The process variables involved in a belt grinding process include the grit and abrasive type of grinding belt, belt speed, contact wheel hardness, serration, and grinding force. Changing these process variables will affect the performance of the process. The literature survey on belt grinding shows certain limited understanding of material removal on the process variables. Experimental trials were conducted based on the Taguchi Method to evaluate the influence of individual and interactive process variables. Analysis of variance (ANOVA) was employed to investigate the belt grinding characteristics on material removal. This research work describes a systematic approach to optimise process parameters to achieve the desired stock removal in a compliant Abrasive Belt Grinding process. Experimental study showed that the removed material from a surface due to the belt grinding process has a non-linear relationship with the process variables. In this paper, the Adaptive Neuro-Fuzzy Inference System (ANFIS) model is used to determine material removal. Compared with the experimental results, the model accurately predicts the stock removal. With further verification of the empirical model, a better understanding of the grinding parameters involved in material removal, particularly the influence of the individual process variables and their interaction, can be obtained.en
dc.description.sponsorshipNRF (Natl Research Foundation, S’pore)en
dc.format.extent17 p.en
dc.language.isoenen
dc.relation.ispartofseriesApplied Sciencesen
dc.rights© 2017 by The Authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).en
dc.subjectBelt Grindingen
dc.subjectANOVAen
dc.titlePredictive Modelling and Analysis of Process Parameters on Material Removal Characteristics in Abrasive Belt Grinding Processen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.researchRolls-Royce@NTU Corporate Laben
dc.identifier.doi10.3390/app7040363en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:MAE Journal Articles

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.