Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/88741
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGanapathi, A. S.en
dc.contributor.authorMaheshwari, Muneeshen
dc.contributor.authorJoshi, Sunil Chandrakanten
dc.contributor.authorChen, Zhongen
dc.contributor.authorAsundi, Anand Krishnaen
dc.contributor.authorTjin, Swee Chuanen
dc.contributor.editorQuan, Chenggenen
dc.contributor.editorQian, Kemaoen
dc.contributor.editorAsundi, Ananden
dc.contributor.editorChau, Fook Siongen
dc.date.accessioned2018-12-13T08:45:35Zen
dc.date.accessioned2019-12-06T17:09:58Z-
dc.date.available2018-12-13T08:45:35Zen
dc.date.available2019-12-06T17:09:58Z-
dc.date.issued2015en
dc.identifier.citationGanapathi, A. S., Maheshwari, M., Joshi, S. C., Chen, Z., Asundi, A., & Tjin, S. C. (2015). Fibre Bragg grating sensors for in-situ measurement of resin pressure in curing composites. Proceedings of SPIE - International Conference on Experimental Mechanics 2014, 9302, 93021T-. doi:10.1117/12.2084783en
dc.identifier.urihttps://hdl.handle.net/10356/88741-
dc.identifier.urihttp://hdl.handle.net/10220/46958en
dc.description.abstractA fibre optic sensor was developed for in-situ pressure measurement based on the principle of differential pressure in liquids. This sensor system is very simple and consists of fibre Bragg grating (FBG) done on a fibre with core diameter of 9 μm. A calibration study was carried out with a water column and the pressure sensitivity was found to be 1.636 × 10-2MPa-1. The results show that response of FBG to the rise of water level is linear and agrees well with the theoretical results. The reliability of the sensors is confirmed by repeating the measurements for three times. The sensor is useful in applications that involve in-situ resin pressure measurement in manufacturing of laminated composite materials.en
dc.format.extent6 p.en
dc.language.isoenen
dc.rights© 2015 Society of Photo-optical Instrumentation Engineers (SPIE). This paper was published in Proceedings of SPIE - International Conference on Experimental Mechanics 2014 and is made available as an electronic reprint (preprint) with permission of Society of Photo-optical Instrumentation Engineers (SPIE). The published version is available at: [http://dx.doi.org/10.1117/12.2084783]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.subjectFBGen
dc.subjectSensoren
dc.subjectDRNTU::Engineering::Mechanical engineeringen
dc.titleFibre Bragg grating sensors for in-situ measurement of resin pressure in curing compositesen
dc.typeConference Paperen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.contributor.schoolSchool of Materials Science and Engineeringen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.conferenceProceedings of SPIE - International Conference on Experimental Mechanics 2014en
dc.identifier.doi10.1117/12.2084783en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:MAE Conference Papers
Files in This Item:
File Description SizeFormat 
Fibre Bragg grating sensors for in-situ measurement of resin pressure in curing composites.pdf500.89 kBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.