Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/88886
Title: Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
Authors: Lim, Jian Hui
Panda, Biranchi
Pham, Quang-Cuong
Keywords: 3D Concrete Printing
Reinforcement
Issue Date: 2018
Source: Lim, J. H., Panda, B., & Pham, Q.-C. (2018). Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement. Construction and Building Materials, 178, 32-41.
Series/Report no.: Construction and Building Materials
Abstract: 3D concrete printing has recently become the subject of very rapidly growing research activities all over the world. An obstacle to develop 3D concrete has been the lack of tensile strength and therefore, limiting the printed component for structural application. This can be partly solved by designing fiber reinforced concrete or concrete with in-process embedded steel reinforcement. This article presents our first findings of using a steel cable reinforcing nozzle which can directly entrain continuous steel cable inside any extrudable mortar (e.g geopolymer), thus creating a hybrid reinforcement, that will improve flexural strength and ductility of the geopolymer composite. We have tested different cable reinforcements and compared their performance based on 4-point bending test. From experimental results, it was found that steel cables can provide a suitable reinforcement and hence improve the flexural strength of 3D printed concrete by 290%. Further research into optimal reinforcement placement, configuration and reinforcement material is recommended.
URI: https://hdl.handle.net/10356/88886
http://hdl.handle.net/10220/44857
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2018.05.010
Rights: © 2018 Elsevier Ltd. This is the author created version of a work that has been peer reviewed and accepted for publication by Construction and Building Materials, Elsevier Ltd. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1016/j.conbuildmat.2018.05.010].
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:MAE Journal Articles

Files in This Item:
File Description SizeFormat 
2nd_revised_manuscript-compressed.pdf1.08 MBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.