Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/88968
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFu, Shaoweien
dc.contributor.authorCheng, Fangen
dc.contributor.authorTjahjowidodo, Tegoehen
dc.contributor.authorZhou, Yuen
dc.contributor.authorButler, Daviden
dc.date.accessioned2018-09-18T01:43:01Zen
dc.date.accessioned2019-12-06T17:14:50Z-
dc.date.available2018-09-18T01:43:01Zen
dc.date.available2019-12-06T17:14:50Z-
dc.date.issued2018en
dc.identifier.citationFu, S., Cheng, F., Tjahjowidodo, T., Zhou, Y., & Butler, D. (2018). A non-contact measuring system for in-situ surface characterization based on laser confocal microscopy. Sensors, 18(8), 2657-. doi:10.3390/s18082657en
dc.identifier.issn1424-8220en
dc.identifier.urihttps://hdl.handle.net/10356/88968-
dc.identifier.urihttp://hdl.handle.net/10220/46015en
dc.description.abstractThe characterization of surface topographic features on a component is typically quantified using two-dimensional roughness descriptors which are captured by off-line desktop instruments. Ideally any measurement system should be integrated into the manufacturing process to provide in-situ measurement and real-time feedback. A non-contact in-situ surface topography measuring system is proposed in this paper. The proposed system utilizes a laser confocal sensor in both lateral and vertical scanning modes to measure the height of the target features. The roughness parameters are calculated in the developed data processing software according to ISO 4287. To reduce the inherent disadvantage of confocal microscopy, e.g., scattering noise at steep angles and background noise from specular reflection from the optical elements, the developed system has been calibrated and a linear correction factor has been applied in this study. A particular challenge identified for this work is the in-situ measurement of features generated by a robotized surface finishing system. The proposed system was integrated onto a robotic arm with the measuring distance and angle adjusted during measurement based on a CAD model of the component in question. Experimental data confirms the capability of this system to measure the surface roughness within the Ra range of 0.2–7 μm (bandwidth λc/λs of 300), with a relative accuracy of 5%.en
dc.description.sponsorshipASTAR (Agency for Sci., Tech. and Research, S’pore)en
dc.format.extent15 p.en
dc.language.isoenen
dc.relation.ispartofseriesSensorsen
dc.rights© 2018 by The Author(s). Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).en
dc.subjectNon-contacten
dc.subjectSurface Roughnessen
dc.subjectDRNTU::Engineering::Mechanical engineeringen
dc.titleA non-contact measuring system for in-situ surface characterization based on laser confocal microscopyen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.3390/s18082657en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:MAE Journal Articles

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.