Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/89005
Title: Investigation on the non-uniform temperature distribution of large-diameter concrete silos under solar radiation
Authors: Zhao, Liang
Yang, Zhiyong
Wang, Lijie
Keywords: DRNTU::Engineering::Civil engineering
Silos
Temperature
Issue Date: 2018
Source: Zhao, L., Yang, Z., & Wang, L. (2018). Investigation on the non-uniform temperature distribution of large-diameter concrete silos under solar radiation. Mathematical Problems in Engineering, 2018, 5304974-. doi: 10.1155/2018/5304974
Series/Report no.: Mathematical Problems in Engineering
Abstract: There is a growing demand for silos with large diameters and volumes; hence, the stresses induced by the temperature differences between the inner and the outer surfaces of the concrete walls of the large silos become significant. Sunshine is the main source of the temperature differences; and it is necessary to investigate the influences of sunshine on large concrete silos and ensure their safety and durability. In this paper, the temperature distribution of a concrete silo exposed to the sunshine was measured on site. A finite element (FE) model was built to analyze the temperature distribution under the sunshine, and the FE model was validated by comparing the yielded temperature field with that obtained on site. Based on the temperature field yielded in the FE model, the internal forces of the silo were determined by performing a structural analysis. After that, the FE model was extended and used for a parametrical study, and the influences induced by the factors like meteorological parameters, dimension of silos, and reference temperature on the temperature effects of the silo were investigated. The simulation results showed that the temperature gradient exhibited significant nonlinearities along the wall thickness. The performance of a steady-state analytical method was evaluated, which is conventionally used for the design of silos. It was found that, for the silos with the thicknesses of more than 30 centimeters, the steady-state method overestimated the temperature effects. It is suggested here that nonlinear temperature gradients should be employed for considering the temperature effects of large silos.
URI: https://hdl.handle.net/10356/89005
http://hdl.handle.net/10220/47007
ISSN: 1024-123X
DOI: 10.1155/2018/5304974
Rights: © 2018 Liang Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:CEE Journal Articles

SCOPUSTM   
Citations 50

1
Updated on Jan 16, 2021

PublonsTM
Citations 50

1
Updated on Jan 13, 2021

Page view(s) 50

53
Updated on Jan 17, 2021

Download(s) 50

18
Updated on Jan 17, 2021

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.