Please use this identifier to cite or link to this item:
|Title:||The Production of Porous Hydroxyapatite Scaffolds with Graded Porosity by Sequential Freeze-Casting||Authors:||Lee, Hyun
|Issue Date:||2017||Source:||Lee, H., Jang, T.-S., Song, J., Kim, H.-E., & Jung, H.-D. (2017). The Production of Porous Hydroxyapatite Scaffolds with Graded Porosity by Sequential Freeze-Casting. Materials, 10(4), 367-.||Series/Report no.:||Materials||Abstract:||Porous hydroxyapatite (HA) scaffolds with porosity-graded structures were fabricated by sequential freeze-casting. The pore structures, compressive strengths, and biocompatibilities of the fabricated porous HA scaffolds were evaluated. The porosities of the inner and outer layers of the graded HA scaffolds were controlled by adjusting the initial HA contents of the casting slurries. The interface between the dense and porous parts was compact and tightly adherent. The porosity and compressive strengths of the scaffold were controlled by the relative thicknesses of the dense/porous parts. In addition, the porous HA scaffolds showed good biocompatibility in terms of preosteoblast cell attachment and proliferation. The results suggest that porous HA scaffolds with load-bearing parts have potential as bone grafts in hard-tissue engineering.||URI:||https://hdl.handle.net/10356/89378
|ISSN:||1996-1944||DOI:||10.3390/ma10040367||Rights:||© 2017 by The Author(s). Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||SCBE Journal Articles|
Files in This Item:
|The Production of Porous Hydroxyapatite Scaffolds.pdf||12.45 MB||Adobe PDF|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.