Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/89523
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMou, Jinchaoen
dc.contributor.authorShen, Zhongxiangen
dc.date.accessioned2018-06-06T08:55:00Zen
dc.date.accessioned2019-12-06T17:27:35Z-
dc.date.available2018-06-06T08:55:00Zen
dc.date.available2019-12-06T17:27:35Z-
dc.date.issued2017en
dc.identifier.citationMou, J., & Shen, Z. (2017). Broadband and thin magnetic absorber with non-Foster metasurface for admittance matching. Scientific Reports, 7(1), 6922-.en
dc.identifier.issn2045-2322en
dc.identifier.urihttps://hdl.handle.net/10356/89523-
dc.description.abstractOne of the long-standing and challenging problems in microwave engineering is the realization of ultra-wideband absorption using extremely-thin structures. Magnetic material can facilitate thickness reduction for microwave absorbers but also bring inherent narrowband admittance matching conundrum originating from its frequency-dispersive permeability and high permittivity. In this paper, we propose a simple and yet effective solution based on the concept of admittance matching with non-Foster metasurface (NFMS). Building on this concept, an ultra-wideband and extremely-thin magnetic absorber is achieved, with a simple structure consisting of a conductor-backed magnetic sheet (CMBS) coated by a NFMS. The NFMS with negatively inductive susceptance can properly cancel its positively frequency-dispersive counterpart from the CMBS so that constructive interference near the absorber can be obtained over a wide frequency band. Furthermore, the NFMS will compensate the surface conductance required for maximum incident power dissipation. As an example, we demonstrate an absorber with one-frequency decade bandwidth and a thickness of only 1/255 wavelength at the lowest operation frequency. The proposed concept enables versatile admittance matching techniques using a single-layered and has the potential to be used in the development of interesting low-profile and broadband microwave devices.en
dc.format.extent9 p.en
dc.language.isoenen
dc.relation.ispartofseriesScientific Reportsen
dc.rights© 2017 The Author(s). This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. Te images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.en
dc.subjectNon-Foster Metasurfaceen
dc.subjectConductor-backed Magnetic Sheeten
dc.titleBroadband and thin magnetic absorber with non-Foster metasurface for admittance matchingen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.identifier.doi10.1038/s41598-017-07323-4en
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:EEE Journal Articles

SCOPUSTM   
Citations 20

13
Updated on Sep 3, 2020

PublonsTM
Citations 50

11
Updated on Nov 27, 2020

Page view(s)

200
Updated on Nov 28, 2020

Download(s) 50

58
Updated on Nov 28, 2020

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.