Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/90083
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDmitriev, S. V.en
dc.contributor.authorStolyarov, V. V.en
dc.contributor.authorBabicheva, Rita I.en
dc.contributor.authorZhou, Kunen
dc.date.accessioned2019-07-18T04:09:32Zen
dc.date.accessioned2019-12-06T17:40:17Z-
dc.date.available2019-07-18T04:09:32Zen
dc.date.available2019-12-06T17:40:17Z-
dc.date.issued2017en
dc.identifier.citationBabicheva, R. I., Dmitriev, S. V., Stolyarov, V. V., & Zhou, K. (2017). Plastic and fracture behaviour of nanocrystalline binary Al alloys with grain boundary segregation. Letters on Materials, 7(4), 428-432. doi:10.22226/2410-3535-2017-4-428-432en
dc.identifier.issn2218-5046en
dc.identifier.urihttps://hdl.handle.net/10356/90083-
dc.description.abstractThe paper studies the stress-strain and fracture behaviour of nanocrystalline (NC) pure Al and NC binary Al-X alloys (X can be Fe, Co, Ti, Mg or Pb) with grain boundary (GB) segregation during their tensile deformation at room temperature via molecular dynamics simulation. The computational cell used for the modeling contains nano-sized grains of Al majority of which has the high-angle type GBs. The binary alloys were obtained through the substitution of Al atoms in GBs by atoms of the alloying elements. Stress-strain curves of the considered materials were calculated, and their microstructure evolution was analyzed. It was found that GB segregations can significantly alter the deformation behaviour of NC Al. The NC pure Al and two alloys, Al with Fe and Al with Mg, undergo the intergranular fracture which is noticeable already at ~ 8 % strain, while the other alloys do not demonstrate any failure process up to 40 % deformation. The main crack growth mechanism is the formation of nano-voids at GBs and triple junctions followed by their coalescence at higher applied stresses. The obtained results demonstrate that GB segregation of Co can have a positive effect on both plasticity and strength of NC Al, and Ti atoms in GBs can result in its improved ductility.en
dc.format.extent5 p.en
dc.language.isoenen
dc.relation.ispartofseriesLetters on Materialsen
dc.rights© 2017 Institute for Metals Superplasticity Problems of Russian Academy of Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License.en
dc.subjectEngineering::Mechanical engineeringen
dc.subjectMolecular Dynamicsen
dc.subjectNanocrystalline Aluminiumen
dc.titlePlastic and fracture behaviour of nanocrystalline binary Al alloys with grain boundary segregationen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.22226/2410-3535-2017-4-428-432en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:MAE Journal Articles

SCOPUSTM   
Citations 50

2
Updated on Mar 27, 2024

Web of ScienceTM
Citations 50

2
Updated on Oct 26, 2023

Page view(s)

396
Updated on Mar 27, 2024

Download(s) 50

77
Updated on Mar 27, 2024

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.