Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/90132
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSum, Yee Loonen
dc.date.accessioned2019-05-29T01:21:30Zen
dc.date.accessioned2019-12-06T17:41:25Z-
dc.date.available2019-05-29T01:21:30Zen
dc.date.available2019-12-06T17:41:25Z-
dc.date.issued2019en
dc.identifier.citationSum, Y. L. (2019). Investigation/design of scalable RF metaresonator for building material. Doctoral thesis, Nanyang Technological University, Singapore.en
dc.identifier.urihttps://hdl.handle.net/10356/90132-
dc.description.abstractGlobally, governments are building smarter, greener and more sustainable buildings with the help of technological innovations. Deploying embedded WSN in buildings is one of the promising technologies that enables such a vision. However, such sensors face challenges in sourcing long term power, and transmission of wireless signals in and out of building materials. One way to source power is from the ambient RF signals. To harvest such energy, RF energy harvesting antenna is an important component in embedded WSN systems. This antenna can also be responsible for wireless communications. In addition, building materials enclosing the embedded antenna also affects the transmission of RF power for harvesting and communications. In this thesis, a study on the concepts of metamaterial and electrically small antennas is performed to combine both concepts in the design of an electrically small antenna, and a scalable antenna array suitable for RF energy harvesting and wireless communications. Another aspect affecting RF energy harvesting and wireless communications indoors is also investigated in this thesis. Analysis into some commonly used admixtures to compare the effects on the embedded arrays and the resulting materials is done. Combining concepts from metamaterials and electrically small antenna, an electrically small metaresonator is designed. This antenna has a maximum dimension of one-tenth the wavelength of WiFi spectrum at channel 13. Using the stubbed design, the resonant frequency can be tuned to the required centre frequency at channel 7. The resulting antenna has a S11 of −25 dB, gain of −16 dB and an efficiency of −9 dB, within expectations of an ESA. This electrically small metaresonator is then used as an array element to form into an array using DC combiner topology. Due to its geometry and combining the concepts of metamaterials, the resulting metaresonator array achieves close cell separation distance of 0.0165 λ. The S11 of this array is also able to achieve −25 dB, a gain of −4 dB and an efficiency of −6 dB. Furthermore, an analysis of feeding the array at different feed points also demonstrates the flexibility of this array, making it suitable for embedded WSN in buildings. Next, an investigation into the common building material, cement is done. Comparing admixture pigments typically used in the building industry for colouring of mortar and concrete, the results indicate that cement paste enhanced with 4% micro-sized particles of iron (III) oxide 1) improves the S11 of the embedded array by as much as 20 dB, 2) increases its bandwidth while maintaining the overall shape of the S11, and 3) produces a lesser shift in resonant frequency than cement paste alone. Further analysis into S21 shows that adding micro-sized iron (III) oxide into cement paste improves the RF power transmission into the material compared to cement paste only sample by as much as 10 dB. Further investigations into the application of plaster is done to develop an understanding of certain applications in buildings. The results obtained shows that plaster samples are the same or worse than cement paste samples. Furthermore, the findings suggest that embedding the metaresonator array in between a layer of plaster (enhanced or not) and mortar is not suitable for wireless applications as the S11 is significantly distorted to an unacceptable range. Analysing S21, it is also observed that plaster enhanced with iron (III) oxide layered on mortar also does not significantly change the RF transmission property of the material. These findings indicate that embedding the metaresonator array in plasteren
dc.format.extent233 p.en
dc.language.isoenen
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radioen
dc.titleInvestigation/design of scalable RF metaresonator for building materialen
dc.typeThesisen
dc.contributor.supervisorSoong Boon Heeen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.description.degreeDoctor of Philosophyen
dc.identifier.doi10.32657/10220/48427en
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:EEE Theses
Files in This Item:
File Description SizeFormat 
InvestigationDesign of Scalable RF Metaresonator for Building Material.pdf3.7 MBAdobe PDFThumbnail
View/Open

Page view(s) 50

447
Updated on Mar 28, 2024

Download(s) 20

267
Updated on Mar 28, 2024

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.