Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/91837
Full metadata record
DC FieldValueLanguage
dc.contributor.authorYu, Ya Junen
dc.contributor.authorLim, Yong Chingen
dc.contributor.authorShi, Dongen
dc.date.accessioned2010-05-04T07:26:22Zen
dc.date.accessioned2019-12-06T18:12:49Z-
dc.date.available2010-05-04T07:26:22Zen
dc.date.available2019-12-06T18:12:49Z-
dc.date.copyright2009en
dc.date.issued2009en
dc.identifier.citationYu, Y. J., Lim, Y. C., & Shi, D. (2009). Low-Complexity Design of Variable Bandedge Linear Phase FIR Filters With Sharp Transition Band. IEEE Transactions On Signal Processing. 57(4), 1328-1338.en
dc.identifier.issn1053-587Xen
dc.identifier.urihttps://hdl.handle.net/10356/91837-
dc.identifier.urihttp://hdl.handle.net/10220/6247en
dc.description.abstractThis paper presents a very low-complexity design of variable bandedge linear phase finite-impulse-response (FIR) filters with fixed sharp transition width. The idea is to first decompose the input signal into several channels in the frequency domain. The channel(s) involved with the transition band of the variable filter due to the variation of the bandedge is (are) shaped to produce the required transition band, and then summed up with the channels involved with the passband of the variable filter to produce the required frequency response. The proposed variable filter has extremely low complexity when the transition band is sharp, if compared with other techniques such as the Farrow structure. It is possible that the computational complexity of the variable filter is even lower than that of a corresponding fixed filter with the same transition width and ripple specifications implemented in its direct form.en
dc.format.extent11 p.en
dc.language.isoenen
dc.relation.ispartofseriesIEEE transactions on signal processingen
dc.rights© 2009 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/site This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.en
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen
dc.titleLow complexity design of variable bandedge linear phase FIR filters with sharp transition banden
dc.typeJournal Articleen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.identifier.doihttp://dx.doi.org/10.1109/TSP.2008.2010597en
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:EEE Journal Articles

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.