Please use this identifier to cite or link to this item:
|Title:||Thermo-mechanical characterization of surface-micromachined microheaters using in-line digital holography||Authors:||Jayaraman, Balaji
Singh, Vijay Raj
Hegde, Gopalkrishna M.
|Keywords:||DRNTU::Science::Physics::Optics and light||Issue Date:||2010||Source:||Jayaraman, B., Singh, V. R., Anand, A., Bhat, N., & Hegde, G. M. (2010). Thermo-mechanical characterization of surface-micromachined microheaters using in-line digital holography. Measurement Science and Technology, 21(1).||Series/Report no.:||Measurement science and technology||Abstract:||This paper describes the application of lensless in-line digital holographic microscopy (DHM) to carry out thermo-mechanical characterization of microheaters fabricated through PolyMUMPs three-layer polysilicon surface micromachining process and subjected to a high thermal load. The mechanical deformation of the microheaters on the electrothermal excitation due to thermal stress is analyzed. The numerically reconstructed holographic images of the microheaters clearly indicate the regions under high stress. A double-exposure method has been used to obtain the quantitative measurements of the deformations, from the phase analysis of the hologram fringes. The measured deformations correlate well with the theoretical values predicted by a thermo-mechanical analytical model. The results show that lensless in-line DHM with Fourier analysis is an effective method for evaluating the thermo-mechanical characteristics of MEMS components.||URI:||https://hdl.handle.net/10356/94023
|ISSN:||0957-0233||DOI:||10.1088/0957-0233/21/1/015301||Rights:||© 2010 IOP Publishing Ltd. This is the author created version of a work that has been peer reviewed and accepted for publication by Measurement Science and Technology, IOP Publishing Ltd. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [DOI: http://dx.doi.org/10.1088/0957-0233/21/1/015301].||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Journal Articles|
Files in This Item:
|93.Thermo-mechanical characterization of surface-micromachined microheaters.pdf||779.52 kB||Adobe PDF|
Updated on Jan 19, 2023
Web of ScienceTM
Updated on Feb 4, 2023
Page view(s) 5852
Updated on Feb 5, 2023
Updated on Feb 5, 2023
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.